Setting communication time, Previous screen

7-5 EXTERNAL INPUT SETTING

When optional units operate (for example, when a sensor is activated or call button is pressed), the master monitor station and sub master station will receive an alert sound. Also, when notification at door is enabled, the door station also receives an alert sound.

These operations must be performed by an installer. Please do not change these settings yourself.

7-5-1：Setting the optional units detection method. Initial setting：

1 After performing steps 1 and 2 in section 7-1, select "EXT. INPUT"

and press MENU button ( ).

2 In the "EXTERNAL INPUT SETTING" screen, press  button and

button to select "DETECTION METHOD" and press MENU

button ( ).

3 In the "EXTERNAL INPUT DETECTION METHOD" screen, press

button or  button to select the detection method.

:dry closure contact input

:External input disabled

4 Press	MENU button (	) to complete the settings and return to



the previous screen.

7-5-2：Setting the alert sound time.

Initial setting: Notiﬁcation at door disabled/alert sound is 30 sec.

1 In the "EXTERNAL INPUT SETTING" screen, press  button or

button to select "NOTICE AT DOOR [1]" and press MENU

button ( ).

2 In the "NOTIFICATION AT DOOR SETTING" screen, press  button or  button to select the "Notification method".

DISABLE 30SEC :Notification at door disabled/alert sound is 30 sec.

DISABLE CONT. :Notification at door disabled/alert sound is continuous

ENABLE CONT. :Notification at door

enabled/alert sound is continuous

3 Press MENU button ( ) to complete the settings and return

to the previous screen. Press REC button ( ) to cancel the setting and return to the previous screen.

English

Français

Nederlands

7-6 Setting communication time

Select the door station communication time from "1 min.", "2 min.", "3			3
min.", and "5 min.". Communication time initial setting: "1 min."
1 After performing step 1 in section 7-1, select "COMMUNICATION"
and press	MENU button (	).