Pan/tilt operation, Zoom Picture Pre-set

English

Français

Nederlands

8-6 Pan/tilt operation

1 When a zoom picture is displayed, press , , , or  button.

•［］: Up
•［］: Down
•［］: Left
•［］: Right
• Moving diagonally is also possible.	[Zoom picture]
	[Zoom picture]

The image range of the zoom picture and wide picture differs. The edges of the wide picture do not display with the zoom picture.

The picture can be set to display using a set zoom picture position	2 Press ZOOM/WIDE button (for at least 2 seconds).
for when a call is received from the door station. When switching	• A beep will sound and the position setting will be completed.
from the wide picture to the zoom picture, the zoom picture displays
starting from the pre-set position.

1 When a zoom picture is displayed, press p, q, t, or u button. (Ex. Pressing p button moves the picture up.)

•While viewing the picture, set the desired picture position.

NOTES: 1. To change the zoom picture position that has been set, perform the zoom position setting again. The previous setting will be overwritten.

2.The zoom picture position set with the master monitor station will also be displayed at the sub monitor station.

8-8

At night, the door station Illuminator LED lights up during calling or communication.

8-8-1When a call is made from the door station 1 If CALL button of door station is pressed

The Illuminator

LED lights up.

8-8-2	Light up the Illuminator LED during entrance
	monitoring
1 When	TALK button is pressed during entrance

monitoring, communication starts and the Illuminator LED will light up.

•Inside sound can be heard at the entrance.

Communication starts at this time, so be aware that inside sound can be heard at the entrance.

2 When communication ends, the illuminator LED will go out.

NOTES: Distinguishing between day and night is automatically done by the door station.

- 14 -