Aiphone JK-1MED Backlight adjustment, Night sensitivity adjustment, Automatic recording

Page 15

8-9 Backlight adjustment, Night sensitivity adjustment

To perform adjustment

To cancel adjustment

1 Press

ADJUST button when the image is difficult to see.

1 Press

ADJUST button during adjustment.

Automatic adjustment to a more visible screen is performed. The

The adjust icon will disappear and the screen returns to the pre-

adjust icon displays at this time.

adjustment screen

 

Adjust icon (day)

 

 

 

Adjust icon (night)

NOTES: 1. Distinguishing between day and night is automatically done by

<Day>

<Night>

 

the door station.

 

 

 

2. Pressing

ADJUST button at night makes the caller's face

 

 

 

easier to see, but moving subjects may be more difficult to see.

[Before adjustment]

[Before adjustment]

 

 

Adjust icon

Adjust icon

 

display

display

[After adjustment]

[After adjustment]

8-10 Automatic recording

If a call is received from a video door station, the unit starts recording automatically. The record LED (red) flashes during recording.

Recording starts approximately 2 seconds after CALL button of video door station is pressed. A maximum

length of approximately 6 seconds (6 shots) can be recorded, with 1 picture and 1 shot for each second.

A maximum of 40 images can be recorded (combined total of automatic recording and manual recording images). If 40 images are exceeded, images are overwritten starting from the image with the oldest recording date.

NOTES: 1. The automatic recording function cannot be cancelled.

2. The recorded pictures are recorded using the method (section 7-10) that has been set. However, if switching between zoom and wide is performed during automatic recording, the displayed image will be recorded.

3.The picture during entrance monitoring is not automatically recorded. If you wish to record this screen, press

REC button.

The initial setting is for recording to be done with the first three pictures as zoom pictures at a pre-set position, and the next three pictures as wide pictures.

 

 

Zoom pictures (from 1st shot to 3rd shot)

 

 

 

 

 

Wide pictures (from 4th shot to 6th shot)

 

 

 

1st shot

 

 

2nd shot

 

 

4th picture

 

 

 

 

 

 

 

 

 

 

5th picture

 

 

 

 

 

 

3rd shot

 

 

 

 

 

 

 

6th picture

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

Français

Nederlands

8-11 Manual recording

1 Display a video image with an operation such as entrance

2 Press REC button (

). The record LED (red) flashes (6 times)

monitoring.

and recording starts.

 

 

 

A maximum length of approximately 6 seconds (6 shots) can be

NOTES: 1. Manual recording is not possible during automatic recording (for

 

recorded, with 1 image and 1 shot for each second.

approximately 7 seconds after receiving a call from the door station).

 

A maximum of 40 images can be recorded (combined total of

2. After the end of automatic recording (approx. 7 seconds after

 

 

automatic recording and manual recording images). When 40

receiving a call from the door station), recording of another image in

 

 

images are exceeded, new images overwrite old images starting

addition to the automatically recorded image can be performed.

 

 

 

 

from the oldest recorded date.

3. When manual recording, the displayed image is recorded.

 

 

 

 

 

 

 

 

 

 

- 15 -

 

Image 15
Contents Monitor-hoofdpost JK-1MEDPackage Contents PrecautionsWiring method, wiring distance Wire the units from station-to-station daisy-chainedCable AC transformer WiringInsert wires securely into each terminal as shown 230V AC NDetection MS or more Confirmation time Start signal only detection methodDry closure contact External sensor inputNames Back wiringSurface wiring Mounting※ Setting can also be done by pressing ZOOM/WIDE button Setting UPSetting screens and display methods Manual, an explanation is given using REC buttonAfter performing steps 1 and 2 in -1, select DATE/TIME Initial Setting screenLED red will flash as a notification. Reset the time After performing steps 1 and 2 in -1, select LanguagePrevious screen Setting communication timeAutomatic night volume adjustment Restore default settingPress-to-talk setting Setting picture recording2nd shot 4th shot 5th shot 3rd shot 6th shot Instant voice call function Answering a door call HANDS-FREE mode, PTT modePTT mode OperationsRoom-to-room communication WIDE/ZOOM switchingPress ZOOM/WIDE button when a picture is displayed Entrance monitoringNight illumination When communication ends, the illuminator LED will go outPan/tilt operation Zoom Picture Pre-setBacklight adjustment, Night sensitivity adjustment Automatic recordingManual recording Images. Saved pictures are not overwritten Play recorded pictureSave recorded picture Images can be saved from the recorded images maximumWarranty