Aiphone JK-1MED operation manual Wiring method, wiring distance, Cable

Page 3


	2	INSTALLATION

	2-1	Mounting locations
	1 Install	the master monitor station in a place			2 The master monitor station has switches on	3 Allow at least 15 cm (6") of vertical open
	where the screen is not exposed to direct				both sides. Allow at least 5 cm (2") of open	space from the center of the mounting
	sunlight.				space on either side.	bracket in order to mount the master
						monitor station.

English

2

+5 cm (2")

JK-1MED

+ 5 cm

(2")

3

+15 cm (6")

Français

2-2 Wiring method, wiring distance

Wire the units from station-to-station (daisy-chained).

		A
	JK-DA		JK-1HD
	JK-DV		JK-1HD
	JK-DV
	JK-DVF	JK-1MED
		JK-1MED	JK-1SD
	2	4	JK-1SD
	2	4

	B	C		Ø 0,65 mm	22 AWG	Ø 1,0 mm	18 AWG
		IER-2		Ø 0,65 mm	22 AWG	Ø 1,0 mm	18 AWG
		IER-2	A	50 m	165'	100 m	330'
			A	50 m	165'	100 m	330'
PS-1820	PS18		B	5 m	16'	10 m	33'
PS-1810DIN			C	75 m	245'	150 m	490'
PS-1820DIN

2-3 Cable
1 Use PVC jacket with PE (polyethylene) insulated cable	3 When using a cable with unused conductors, terminate both ends of
	the unused pair(s) with a 120 Ω resistor.
	JK-1MED	JK-1HD/JK-1SD
(x2)	A1	B1
	A2	B2
	S	SW
2 Never use individual conductors, twisted pair cable or coaxial cable.	S	SW
	B1	+
	B2	-
	L
	L
	+
	-
	120	120

Nederlands

- 3 -

Image 3

Contents Monitor-hoofdpost JK-1MEDPackage Contents PrecautionsWiring method, wiring distance Wire the units from station-to-station daisy-chainedCable AC transformer WiringInsert wires securely into each terminal as shown 230V AC NDetection MS or more Confirmation time Start signal only detection methodDry closure contact External sensor inputNames Back wiringSurface wiring Mounting※ Setting can also be done by pressing ZOOM/WIDE button Setting UPSetting screens and display methods Manual, an explanation is given using REC buttonAfter performing steps 1 and 2 in -1, select DATE/TIME Initial Setting screenLED red will flash as a notification. Reset the time After performing steps 1 and 2 in -1, select LanguagePrevious screen Setting communication timeAutomatic night volume adjustment Restore default settingPress-to-talk setting Setting picture recording2nd shot 4th shot 5th shot 3rd shot 6th shot Instant voice call function Answering a door call HANDS-FREE mode, PTT modePTT mode OperationsRoom-to-room communication WIDE/ZOOM switchingPress ZOOM/WIDE button when a picture is displayed Entrance monitoringNight illumination When communication ends, the illuminator LED will go outPan/tilt operation Zoom Picture Pre-setBacklight adjustment, Night sensitivity adjustment Automatic recordingManual recording Images. Saved pictures are not overwritten Play recorded pictureSave recorded picture Images can be saved from the recorded images maximumWarranty