Aiphone JK-1MED operation manual Operating Method, Setting UP, Setting screens and display methods

6 OPERATING METHOD

To operate this unit, check the symbol and then press the appropriate operation button This is not a touch-panel operation.

Do not press on the LCD or subject it to high impact.

The LCD glass could break which could result in an injury.

Symbol

The symbols differ according to the symbol screen.

Operation buttons:

Press to select the symbol that is displayed on the screen.

* The name of the operation button may differ from the name of the symbol.

To operate a symbol, press the operation button that is below the symbol.

Example: To activate manual recording, press RECORD button below the symbol

*In the manual, an explanation is given using

the REC button ( ).

7 SETTING UP

Main symbols and function descriptions

Symbol	Function description
	To manually record.
	To return to the screen of the previous
	operation.
	To display the previous (more recent
	date) picture.
	To play the recorded pictures.
	To display the next (older date) picture.
	To save or erase an image.
	To erase a recorded image.
	To fast forward the play screen.
	To pause the play screen.
	To advance the play screen frame by
	frame.
	To reverse the play screen frame by
	frame.
	To erase the display.
	To save recorded pictures.

※Setting can also be done by pressing ZOOM/WIDE button.

English

Français

Nederlands

Upon initial installation, set the time first. If the unit is used without setting the time, the menu LED (red) will light up as notification.

When power has not been supplied for at least 3 hours, the time setting will return to the initial setting and the menu LED may flash. Reset the time again.

If there are no operations for approximately 1 minute during the setup mode, the setting will end automatically. If the settings are incomplete, start again from the beginning.

7-1 Setting screens and display methods

1 In the standby mode, press MENU button until the setting screen is displayed (approximately 1 second).

> 1Sec.

2 Press  button or  button to select "INITIAL SETTING", and

press MENU button ( ).

3 Press  button or  button to select the item you want to set or

check, and set with the MENU button ( ).

SET THE DATE/TIME

To set the year, date, and time.

SET EXTERNAL INPUT

SETTING

To set the external input.

SELECT THE LANGUAGE

To select the language used.

RESTORE DEFAULT

SETTING

To initialize the settings.

4 When completing the time setting, press OFF button to return to the standby mode. In other cases, set by pressing MENU button

( ). Press REC button ( ) to cancel the setting and return to the previous screen.

- 7 -