Aiphone GH series operation manual Mounting the Entrance Station

3	MOUNTING
3-1
1			[2]	[1]
[1]						200mm
						(7-7/8")
					25mm
			[2]		(1")
					W	44mm
						(1-3/4")
						15mm
				[1]		(1/2")
[3]
	GF-2B/3B	W (mm)	W (inch)
	x 1	110	4-5/16"
	x 2	245	4-5/8"
	x 3	380	15"			295mm
	x 4	515	20-1/4"
						(11-5/8")
	x 5	650	25-9/16"
	x 6	785	30-7/8"
	x 7	920	36-1/4"
	x 8	1055	41-9/16"
	x 9	1190	46-1/8"	25mm	25mm
				(1")	(1")
				W		44mm
						(1-3/4")
						15mm
						(1/2")

2

[4]

34

Mounting the Entrance Station (1)

[1]Back box

[2]Joint pipe

[3]Back box assembly dimensions

[4]Special screwdriver (enclosed with GH-BC) 1. Mounting the back box

• Make a hole for the cable.

• Use the joint pipe to assemble the back box.

• Make sure the back box is mounted level.

• Mount the camera and GH-NS module at eye-level for the average height of an adult.

Do not mount the back box on a surface that is recessed by 15 mm (1/2") or more from the external surface of the wall.

2. Set up the modules.

•For information on what modules can be used, see 2-1 and 2-2.

6 GH-SW modules can be used. If you would like to connect 7 modules or more, please contact Aiphone.

3. Mount each module panel to the front frame.

•Mount the panels from behind the front frame.

•Insert the notch into the slots on both sides and slide it downward.

4. Mount each module to the mounting bracket.

•Set the modules in the mounting bracket until they click in place.

5. Options

a. Rain hood GF-H

b. Surface-mount box GF-202B

c. Hooded surface-mount box GF-HB d. 80 cm (32") connection cable GF-C

5 a b

c

d

- 13 -