Aiphone GH series operation manual Gh-Da

3-2

1

GH-DA

CN	1	ON		3	4
			2
		1
	CN2

1 0

2

GH-DA

CN2

GH-SW

CN1

3-3

1

CN3

GH-VA

GH-DA

CN1

2

GH-VA GH-NS

GH-DA	GH-10K
GH-AD	GF-BP

GF-C

GF-3B GF-3B

GH-DAGH-NS

CN1

CN2

CN1CN3

CN100 CN2

GH-ADGH-10K

3

GF-C
	GH-DA
GF-3B	GF-3B	GF-3B

3

CN2	CN1
CN1	CN2
CN2	CN1
CN1	CN2
CN2	CN1

4

5

GH-DA

CN	1	ON		3	4
		1	2
	CN2

1 0

Mounting the Entrance Station (3)

1.Example of interconnection of modules.

2.Use GF-C to connect to the name scrolling module.

3.To position the speech module in the center row, run GF-C through the joint pipe in advance.

Mounting the Entrance Station (2)

1.Remove the terminal cover.

2.From the speech module to the next module, insert the attached connector into the socket. Make sure to run the cable under the terminal cover for protection.

3.Connect the connectors between the modules with cables.

4.Run the connection cable through the joint pipe (which you should have made open in advance) and connect CN1 of GH- SW to the next row.

5.Put back the terminal cover.

- 14 -