Aiphone GH series operation manual Optional Handset, GH-1AD GH-1KD

3-5

GH-1AD GH-1KD

1

2

3

3-6

[3]

[2][1]

[1] [2] [3]

83.5mm (3-5/16")

OR

60mm (2-3/8")

[3]

SW1 A	B Do not	remove the		wires (For end users)
		IN	OUT	0.65 10	9
	R1	R2	R1	R2 C CE	K KE

[4]

				remove the		wires (For		endusers)
	A	B	Do not	OUT		C	CE	K	KE
SW1			IN	R2 R1	R2
			R1

Optional Handset

[1]Chassis

[2]Handset (GH-HS)

[3]Screws (x2)

•Connect the station unit joint connector.

GH-HS can be installed only for the color monitor residential station (GH-1KD).

GH-1MD

Residential Station

[1]Mounting screws (x2)

[2]Mounting bracket

[3]1-gang box or round back box

[4]Terminal block (GH-1AD, GH-1KD)

1.Mount the mounting bracket on the 1-gang box.

2.Connect the wiring to the terminal block.

3.Mount the station unit to the mounting bracket.

Strip away the jacket of the cable and insert all wires into the

slots in an orderly fashion. Failure to do so could result in pinching that may damage the wiring.

NOTES: To remove the terminal block, slide the terminal block and pull it out. (GH-1AD, GH-1KD)

- 16 -