Aiphone 0207 AIC operation manual Program Mode GH-NS

8-6

Program Mode (GH-NS)

1.Menu 1: Select language

Choose language to be displayed on GH-NS.

2.Menu 2: Change ID code

Enter new ID code starting with "∗", then 4-digit number. (Example: ∗1234)

3.Menu 3: Set access code

Enter new 4-digit Access Code. (Example: 1234)

•(0000) cannot be registered as an access code.

•Recommend not to use a simple access code such as (1111).

4.Menu 4: Write in resident information Register room #s and resident names. Enter room #s using 1 to 6-digit characters. Enter resident name (up to 16 characters).

5.Menu 5: Set input timeout timer

Operation Timer: If the operation panel is not operated for a certain period of time, the system returns to standby mode. Programmable from 15 to 99 seconds.

Program Timer: If, in Residential Programming mode, the operation panel is not operated for a certain period of time, it automatically cancels the programming mode. Programmable from 30 to 99 seconds.

Call Timer: Call from Entrance panel expires in a certain period of time. Programmable from 30 to 99 seconds.

6.Menu 6: Change greeting

Enter greeting message (up to 160 characters).

7.Menu 7: Transfer link information

With Expanded System, enter unit ID# for transferring Entrance stations and Security guard stations as below;

•Entrance station: Connected to same common line - "programmed ID#" as is. (e.g. transferring to #2: Enter "2"), or Connected to another common line - "programmed ID# plus 8" (e.g. transferring to #1: 1+8=9, Enter "9")

•Security guard station: Connected to same common line - "programmed ID#" as is. (e.g. transferring to #2: Enter "2"), or Connected to another common line - "programmed ID# plus 2" (e.g. #1: 1+2=3, Enter "3")

8.Menu 8: Set the greeting scroll speed 0 = slow, 9 = fast

- 33 -