4Press h on the first handset to transfer the external call to the called handset.
•The external call is transferred.
Note
If there is no answer from the called handset, press i to resume the
external call.
5.8.3Answer an external call during intercom
1During intercom, a new call tone is emitted when there is an incoming external call.
2Press t to answer the external call and end the intercom.
• The call is established.
5.8.4 Switch between an internal
and external call During the call, press i to switch between an internal or external call.
5.8.5 Establish a three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
1During the call, press i to put the external call on hold (the caller can no longer hear you).
2Enter the handset number (key 1 - 5) you wish to establish the
conference call with.
3Press t on the called handset to answer the internal call, where both
internal callers can talk.
• Intercom is established.
4Press and hold i for 2 seconds on the first handset to start the
•CONFERENCE will be displayed on the screen once the conference call is established.
5.9Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.
1Press a on the base station.
• All the registered handsets start
to ring.
2Once retrieved, press any key on the handset to end the paging.
Note
If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode.
Tip
Press a on the base station again to stop paging.
5.10Chain Dialing
This feature allows you to dial an extension to a number already saved in the phonebook during a call.
1Press t to take the line and press o to open phonebook list.
•The phonebook entries are listed in alphabetical order.
Use more of your phone | 25 |