Philips SE255 Reset Unit, Advanced SET and press o, scroll n to Reset and press o, Set Prefix

Page 33

7.5Reset Unit

You can reset your phone to its default settings with this feature.

Warning

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook as well as the unread messages of your answering machine will remain unchanged after reset.

Note

You may have to configure your phone once again. In this case the WELCOME mode will appear again after reset. (Go to chapter 3.3)

1Press m in idle mode, scroll n to

ADVANCED SET and press o, scroll n to RESET and press o.

2CONFIRM? is displayed on the screen.

3Press o again to confirm.

•A validation tone is emitted.

•The unit is reset to its default settings. (See “Default settings” on page 32)

1Press m in idle mode, scroll n to ADVANCED SET and press o, scroll n to AUTO PREFIX and press o.

2DETECT DIGIT is displayed on

the screen. Press o to enter.

•The last stored detect string is displayed (if any).

3Enter a detect string number

(maximum 5 digits) and press o to confirm.

4PREFIX is displayed on the screen. Press o to enter.

•The last stored prefix number is displayed (if any).

5Enter the prefix number (maximum 10 digits) and press o to confirm.

•SAVED is displayed and the screen returns to idle screen.

Note

If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed.

For numbers starting with *, # or P, the prefix number will not be added to the predial number after t is pressed.

7.6Set Prefix

This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on page 17). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialling.

You can enter up to a maximum of 5 digits for the detect string and 10 digits for the auto prefix number.

7.7Change Recall time

Recall time (or dial delay) is the time delay by which the line will be disconnected after you press t key. It can be set to short or long.

The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.

Advanced settings

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents CD255 SE255 Page Table of contents Technical data Personal settingsAdvanced settings Telephone answeringJoden Power requirementsConformity Using GAP standard complianceUse one of the following disposal options Electric, Magnetic and Electromagnetic Fields EMFBatteries Guarantee AAA rechargeable Power supplyYour phone Congratulations on your purchase and welcome to PhilipsOK key o Overview of your phone Earpiece DisplayBack/Clear key c Navigation keys nBattery door Menu key m Idle mode Go to the main menu. I Redial key rLoudspeaker key l Number keysReplace with batteries of the correct type Display iconsLED Indicator Volume keys -+Play/Stop key p SpeakerGetting started Install your phoneCharge battery Install batteryWelcome mode CorrectlyUsing multipacks 26 anytime after the first configurationMenus Menu structureList of countries OFF by default Using your phone Enter a Dialing Pause Call using Direct Access MemoryAnswer a call Handsfree answeringUse more of your phone Press d in idle mode and scroll n to browse the phonebook Access phonebookStore a contact in the phonebook DigitsDirect Access Memory 6.1 Add/Edit Direct Access MemoryDelete Direct Access Memory Access Redial list Using the Redial listBe displayed instead Press c to return to idle mode Save a redial number into the phonebookAccess the Call log Using the Call logDelete all redial numbers Save call list entry into the phonebookDelete a call list entry Using the IntercomDelete all call list entries Intercom another handset NoteAnswer an external call during intercom Switch between an internalEstablish a three-party conference call PagingSet Date and Time Set Time and Date Format Set Time FormatOr 24HOURS Handset Tones Set the Ring Volume Scroll n to Alarm Tone and press o Scroll n to MelodyMelody 2 or Melody 3 and press o to confirm Personal SET and press o, and then press o again to enterSet the Ring Melody Press m in idle mode, scroll n toThere are 10 ring melodies available on your handset Activate/Deactivate Key BeepPress m in idle mode, scroll n to Personal SET and press o Advanced settingsChange PIN RegisterUnregister Base station is ready to accept registrationScreen shows Select CountryAdvanced SET and press o, scroll n to Reset and press o Reset UnitSet Prefix Change Recall timeDefault settings Parameter Default Value Change the Dial ModeAdvanced SET and press o Set First Ring DetectionTelephone answering machine TAM Parameter Default ValueFor Telephone Answering Machine Playing Messages Playback of messages via handsetFunctions available during playback Answ Machine and press oDelete all messages Turn the Answering MachinePlay is displayed. Scroll n to Record OGM and press o Play, Record, or Delete an Outgoing MessageSelect PLAY, Record OGM, or Delete and press o Current status is displayed. Scroll n to selectRemote Access Answering Machine settings Ring DelayActivate/Deactivate Remote Access To 8 or EconomyControlling the Answering Machine from an external call Setting the outgoing message languageKey Action Handset ScreeningAnsw Machine and press Technical dataCD255 SE255Handset does not charge Connection Handset does not switch onIcon is not blinking during charge Communication is lost during a callCannot change the settings of my voice mail Handset warms up when making a long callMy handset keeps going into idle mode Caller does not hear me clearlyUnable to perform remote operation Index Index
Top Page Image Contents