Philips UCZZ01930AB manual Set Date and Time, Set Time and Date Format Set Time Format, Or 24HOURS

Page 28

2Scroll n to select an entry, then

press t.

The first part is dialed. 3 Enter the extension.

Each digit blinks to indicate dial out.

5.11Clock and Alarm settings This feature allows you to set the date, time and alarm settings for your phone. The default date and time are 01/01 and 00:00 respectively.

5.11.1 Set Date and Time

1Press m in idle mode, scroll n to CLOCK&ALARM, and press o,

press o to enter DATE/TIME.

2The last stored date is displayed.

Enter the current date (DD/MM) and press o.

3The last stored time is displayed.

Enter the current time (HH-MM) and press o to confirm.

A validation tone is emitted and the screen returns to the previous menu.

Note

By default the time is in the 24-hour format. If the 12-hour format has been selected, use n to scroll between AM and PM. An error tone will be emitted if an invalid digit is entered in the date/time fields.

Hour: 00 to 23; Minute: 00 to 59

Date: 01 to 31; Month: 01 to 12

Warning

If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.

5.11.2 Set Time and Date Format

5.11.2.1 Set Time Format

1Press m in idle mode, scroll n to CLOCK&ALARM, and press o.

2DATE/TIME is displayed. Scroll n to SET FORMAT and press o.

3TIME FORMAT is displayed. Press o, scroll n to select 12HOURS

or 24HOURS.

4Press o to select the option.

A validation tone is emitted and the screen returns to the SET FORMAT menu.

5.11.2.2 Set Date Format

1Press m in idle mode, scroll n to CLOCK&ALARM, and press o

2DATE/TIME is displayed. Scroll n to SET FORMAT and press o.

3TIME FORMAT is displayed.

Scroll n to DATE FORMAT and press o.

4Scroll n to select DD/MM or MM/DD and press o to select

the option.

26

Use more of your phone

Image 28
Contents CD255 SE255 Page Table of contents Personal settings Technical dataAdvanced settings Telephone answeringPower requirements JodenUsing GAP standard compliance ConformityElectric, Magnetic and Electromagnetic Fields EMF Use one of the following disposal optionsAAA rechargeable Power supply Batteries GuaranteeYour phone Congratulations on your purchase and welcome to PhilipsOverview of your phone Earpiece Display OK key oBack/Clear key c Navigation keys nMenu key m Idle mode Go to the main menu. I Redial key r Battery doorLoudspeaker key l Number keysDisplay icons Replace with batteries of the correct typeVolume keys -+ LED IndicatorPlay/Stop key p SpeakerInstall your phone Getting startedInstall battery Charge batteryWelcome mode Correctly26 anytime after the first configuration Using multipacksMenu structure MenusList of countries OFF by default Using your phone Call using Direct Access Memory Enter a Dialing PauseAnswer a call Handsfree answeringUse more of your phone Access phonebook Press d in idle mode and scroll n to browse the phonebookStore a contact in the phonebook Digits6.1 Add/Edit Direct Access Memory Direct Access MemoryDelete Direct Access Memory Using the Redial list Access Redial listBe displayed instead Press c to return to idle mode Save a redial number into the phonebookUsing the Call log Access the Call logDelete all redial numbers Save call list entry into the phonebookUsing the Intercom Delete a call list entryDelete all call list entries Intercom another handset NoteSwitch between an internal Answer an external call during intercomEstablish a three-party conference call PagingSet Time and Date Format Set Time Format Set Date and TimeOr 24HOURS Scroll n to Alarm Tone and press o Scroll n to Melody Handset Tones Set the Ring VolumeMelody 2 or Melody 3 and press o to confirm Personal SET and press o, and then press o again to enterPress m in idle mode, scroll n to Set the Ring MelodyThere are 10 ring melodies available on your handset Activate/Deactivate Key BeepAdvanced settings Press m in idle mode, scroll n to Personal SET and press oChange PIN RegisterBase station is ready to accept registration UnregisterScreen shows Select CountryReset Unit Advanced SET and press o, scroll n to Reset and press oSet Prefix Change Recall timeChange the Dial Mode Default settings Parameter Default ValueAdvanced SET and press o Set First Ring DetectionParameter Default Value Telephone answering machine TAMFor Telephone Answering Machine Playing Messages Playback of messages via handsetAnsw Machine and press o Functions available during playbackDelete all messages Turn the Answering MachinePlay, Record, or Delete an Outgoing Message Play is displayed. Scroll n to Record OGM and press oSelect PLAY, Record OGM, or Delete and press o Current status is displayed. Scroll n to selectAnswering Machine settings Ring Delay Remote AccessActivate/Deactivate Remote Access To 8 or EconomySetting the outgoing message language Controlling the Answering Machine from an external callKey Action Handset ScreeningTechnical data Answ Machine and pressCD255 SE255Connection Handset does not switch on Handset does not chargeIcon is not blinking during charge Communication is lost during a callHandset warms up when making a long call Cannot change the settings of my voice mailMy handset keeps going into idle mode Caller does not hear me clearlyUnable to perform remote operation Index Index