8.6Answering Machine settings
8.6.1 Ring Delay
This is the number of rings before the answering machine answers and starts playing your greeting message. You can set the answering machine to start playing your greeting message after 3 to 8 rings or the “ECONOMY” option. The default ring delay is 5.
1Press m in idle mode, scroll n to
ANSW MACHINE and press o.
2PLAY is displayed. Scroll n to SETTINGS and press o.
3RING DELAY is displayed. Press o, then scroll n to select from 3
to 8 or ECONOMY.
4Press o again to confirm.
•A validation tone is emitted.
Note
If ECONOMY is selected, the ring delay depends on the answering machine’s condition.
• If there are new messages in the answering machine, it will pick up the line after 2 rings.
• If there are no new messages in the answering machine, it will pick up the line after 6 rings.
• Hence, if you want to check if you have any messages without incurring call charges, you can hang up the call after the 3rd ring.
8.6.2 Remote Access
You can check the messages on your answering machine by calling in from an outside line and entering the remote access code*, you will be able to obtain the messages on your answering machine. The keypad on the phone you use to dial in acts like the functions on your answering machine.
Note
This feature is deactivated by default.
*The remote access code (which is the same as your PIN code) prevents any unauthorised remote access of your answering machine.
8.6.2.1Activate/Deactivate
Remote Access
1Press m in idle mode, scroll n to
ANSW MACHINE and press o.
2PLAY is displayed. Scroll n to SETTINGS and press o.
3RING DELAY is displayed. Scroll
nto REMOTE ACC. and press o.
4The current status is displayed. Scroll n to select ACTIVATE or DEACTIVATE and press o.
•A validation tone is emitted and the screen returns to previous menu.
36 | Telephone answering machine (TAM) |