Philips CD191, CD196 Network type, Auto prefix, Select the recall duration, Set auto prefix

Page 25

2 Select [Services] > [Area code], then press MENU/OK to confirm.

3 Enter the area code, then press MENU/ OK to confirm.

»»The setting is saved.

Deactivate auto removal of the area code

1 Press MENU/OK.

2 Select [Services] > [Area code], then press MENU/OK to confirm.

3 Press REDIAL/C to delete the digits.

4 Press MENU/OK to confirm.

»»The setting is saved.

Network type

Note

•• This feature only applies to models with network type support.

1 Press MENU/OK.

2 Select [Services] > [Network type], then press MENU/OK.

3 Select a network type, then press MENU/ OK.

»»The setting is saved.

Auto prefix

This feature checks and formats your outgoing call number before it is dialed out.The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out.

Note

•• The maximum length of a detect number is 5 digits.The maximum length of an auto prefix number is 10 digits.

Note

•• This is a country dependent feature.

Set auto prefix

1 Press MENU/OK.

2 Select [Services] > [Auto prefix], then press MENU/OK to confirm.

3 Enter the detect number, then press MENU/OK to confirm.

4 Enter the prefix number, then press MENU/OK to confirm.

»»The setting is saved.

Note

•• To enter a pause, press and hold .

Note

•• If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls.

Note

•• The feature is unavailable if the dialed number starts with * and #.

Select the recall duration

Make sure that the recall time is set correctly before you can answer a second call. In normal case, the phone is already preset for the recall duration.You can select among 3 options: [Short], [Medium] and [Long].The number of

24EN

Image 25
Contents CD191 CD196 Contents Frequently asked questions Appendix Important safety instructions Your phone What is in the boxOverview of the base station Overview of the phoneDisplay icons There are more digits on the right. Press REDIAL/C to read Get started Install the handsetConnect the base station Set the country/language Change the remote access PIN codeSet the date and time What is standby mode? Check the battery levelCharge the handset Switch the handset on or off Check the signal strengthMake a call CallsEnd a call Answer a callSwitch between two calls Adjust the earpiece/speaker volumeMute the microphone Turn the speaker on or offMake a conference call with the external callers Enter text and numbers Text and numbersPhonebook Delete a record Edit a recordDelete all records Call log Delete all call records View the redial records Redial listRedial a call Delete a redial recordSound settings Phone settingsName the handset Set the date and time22 EN Auto conference ServicesManage the carrier code Manage the area codeAuto prefix Network typeSelect the recall duration Deactivate auto removal of the area codeSet the dial mode Dial modeRegister the handsets Unregister the handsetsRestore default settings Turn the answering machine on or off Set the answer modeSet the answering machine language Through the baseAnnouncements Restore the default announcementIncoming messages ICM Record an announcementListen to the incoming messages Set the ring delayDelete an incoming message Delete all old incoming messagesActivate/deactivate the remote access Remote accessAccess the answering machine remotely Change the PIN codeLED Behavior of the LED display on the base stationTechnical data Compliance with EMF Declaration of conformityDisposal of your old product and batteries Page Frequently asked questions Text and number input tables AppendixPage 0168
Related manuals
Manual 40 pages 51.43 Kb Manual 6 pages 40.5 Kb