Philips CD191, CD196 user manual Get started, Connect the base station, Install the handset

Page 9

3 Get started

Caution

•• Make sure that you have read the safety instructions in the 'Important safety instruction' section before you connect and install your handset.

Connect the base station

Warning

•• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the phone.

•• Use only the supplied power adapter to charge the batteries.

Note

•• If you subscribe to the digital subscriber line (DSL) high speed internet service through your telephone line, ensure you install a DSL filter between the telephone line cord and the power socket..The filter prevents noise and caller ID problems caused by the DSL interference. For more information on the DSL filters, contact your DSL service provider.

•• The type plate is located on the bottom of the base station.

1 Connect each end of the power adapter to:

• the DC input jack at the bottom of the base station;

• the power socket on the wall.

2 Connect each end of the line cord to:

the telephone socket at the bottom of the base station;

the telephone socket on the wall.

8EN

3 Connect each end of the power adapter to (for multi handset version only):

the DC input jack at the bottom of the extra handset charger.

the power socket on the wall.

Install the handset

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Image 9
Contents CD191 CD196 Contents Frequently asked questions Appendix Important safety instructions Your phone What is in the boxOverview of the base station Overview of the phoneDisplay icons There are more digits on the right. Press REDIAL/C to read Install the handset Get startedConnect the base station Change the remote access PIN code Set the country/languageSet the date and time Check the battery level What is standby mode?Charge the handset Switch the handset on or off Check the signal strengthMake a call CallsEnd a call Answer a callSwitch between two calls Adjust the earpiece/speaker volumeMute the microphone Turn the speaker on or offMake a conference call with the external callers Enter text and numbers Text and numbersPhonebook Edit a record Delete a recordDelete all records Call log Delete all call records View the redial records Redial listRedial a call Delete a redial recordSound settings Phone settingsName the handset Set the date and time22 EN Auto conference ServicesManage the carrier code Manage the area codeAuto prefix Network typeSelect the recall duration Deactivate auto removal of the area codeSet the dial mode Dial modeRegister the handsets Unregister the handsetsRestore default settings Turn the answering machine on or off Set the answer modeSet the answering machine language Through the baseAnnouncements Restore the default announcementIncoming messages ICM Record an announcementListen to the incoming messages Set the ring delayDelete an incoming message Delete all old incoming messagesActivate/deactivate the remote access Remote accessAccess the answering machine remotely Change the PIN codeLED Behavior of the LED display on the base stationTechnical data Declaration of conformity Compliance with EMFDisposal of your old product and batteries Page Frequently asked questions Text and number input tables AppendixPage 0168
Related manuals
Manual 40 pages 51.43 Kb Manual 6 pages 40.5 Kb