available options varies with different countries. For details, consult your service provider.
1 Press MENU/OK.
2 Select [Services] > [Recall time], then press MENU/OK to confirm.
3 Select an option, then press MENU/OK to
confirm.
»»The setting is saved.
Dial mode
Note
•• This feature only applies to models that support both tone and pulse dial.
Dial mode is the telephone signal used in your country.The phone supports tone (DTMF) and pulse (rotary) dial. Consult the service provider for detailed information.
Set the dial mode
1 Press MENU/OK.
2 Select [Services] > [Dial mode], then press MENU/OK to confirm.
3 Select a dial mode, then press MENU/OK to confirm.
»»The setting is saved.
Note
•• If your phone is in pulse dial mode, press * during a call for temporary tone mode. Digits entered for this call are then sent out as tone signals.
Register the handsets
You can register additional handsets to the base station.The base station can register up to 4 handsets.
1
2 | Select [Services] > [Register], then press |
3 | MENU/OK to confirm. |
Enter the system PIN. Press REDIAL/C | |
| to make corrections. Press MENU/OK to |
4 | confirm the PIN. |
Press and hold on the base station for |
5 seconds.
Note
•• For models with an answering machine, you hear a confirmation beep.
»»Registration is complete in less than 2 minutes.The base automatically assigns a handset number to the handset.
Note
•• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.
Note
•• The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1 If two handsets share the same base station, you can unregister a handset with another handset.
2 Press MENU/OK.
3 Select [Services] > [Unregister], then press MENU/OK to confirm.
4 Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the number.
5 Select the handset number to be unregistered.
6 Press MENU/OK to confirm.
»»The handset is unregistered.
EN 25