Philips CD285, CD280 Check the battery level, What is standby mode?, Check the signal strength

Page 10

Check the battery level

The battery icon displays the current battery level.

When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low).

When the handset is on the base station/charger, the bars flash until charging completes.

The empty battery icon flashes. The battery is low and needs recharging.

The handset turns off if the batteries are empty. If you are on the phone, you hear warning tones when the batteries are almost empty.The call gets disconnected after the warning.

What is standby mode?

Your phone is in standby mode when it is idle. The standby screen displays the handset name and number/date and time, signal icon, and battery icon.

Check the signal strength

It displays the link status between the handset and base station. The more bars are shown, the better the connection is.

Ensure the handset is linked to the base station before you make or receive calls and carry out the phone functions and features.

If you hear warning tones when you are on the phone, the handset is almost out of battery or the handset is out of range. Charge the battery or move the handset nearer to the base station.

Switch your handset On/Off

Press and hold to switch off the handset. The screen of handset turns off.

Note

•• When the handset is switched off, no call can be received.

Press and hold to switch on the handset. It takes a few seconds for the handset to power up.

10EN

Image 10
Contents Register your product and get support at CD280 CD285EC Declaration of Conformity Contents Voltages, as defined in the standard EN 60950 Power requirementsTo avoid damage or malfunction Handset Charger Power adapter What is in the boxCongratulations on your purchase and welcome to Philips On the handset screen Overview of the phoneEarpiece Directly above the keyIt displays when you ncrease and decrease the volume It flashes when there is a new voice messageDisplay icons Get started Connect the base stationCharge the handset Install the handsetSet the date and time Press OK to confirmCheck the signal strength Check the battery levelWhat is standby mode? Switch your handset On/OffCalls Make a callMute the microphone Adjust the earpiece volumeAnswer a call Turn the speaker on or offYou can toggle your calls in these ways Press and or Toggle between two callsMake a conference call with the external callers Press , then orMake a conference call Make a call to another handsetTransfer a call While you are on the phoneDuring an external call During the conference callText and numbers Enter text and numbersSwitch between the upper case and lower case Name the handset Phone settingsSound settings Set the display languageSet the docking tone ECO mode»» ECO is displayed in standby mode Set the sound profileTurn off the alarm Alarm clockSet the alarm When the alarm ringsAuto conference ServicesDial mode Select the recall durationManage the area code Network typeRegister the handsets Restore default settingsUnregister the handsets Language Country dependent Handset name Default settingsReceiver volume Volume LevelTechnical data DisplayFrequently asked questions Handset does not ringDisposal of your old product and batteries Declaration of conformityCompliance with EMF Manufacturer’s instructionsPage Directive 1999/5/CE 1999/5/ECRichtlijn 1999/5/EG Som framgår av direktiv 1999/5/EG0168