Philips CD280, CD285 Register the handsets, Unregister the handsets, Restore default settings

Select [Menu] > [Services] > [Reset], then press [OK] to confirm.

»» The handset displays a confirmation request.

Press [OK] to confirm. »» All settings are reset.

Register the handsets

You can register additional handsets to the base
station.The base station can register up to 5
handsets.
1	Select [Menu] > [Services] > [Register],
2	then press [OK] to confirm.
	Press and hold on the base station for
	5 seconds until you hear a confirmation
3	beep, then press [OK] to confirm.
	Enter the system PIN. Press [Clear] to
4	make corrections.
	Press [OK] to confirm the PIN.

»» Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset.

Note

•• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.

Note

•• The preset PIN is 0000. No change can be made on it.

Unregister the handsets

1	If two handsets share the same base	Eng l i s h
	station, you can unregister a handset with
2	another handset.
	Select [Menu] > [Services] >
3	[Unregister], then press [OK] to confirm.
	Select the handset number to be
4	unregistered.
	Press [OK] to confirm.

»» The handset is unregistered.

Tip

•• The handset number displays beside the handset name in standby mode.

Restore default settings

You can reset your phone settings to the original factory settings.

1

2

Tip

•• For more information about the default settings, see the section on Default settings.

EN 23