Philips CD285, CD280 user manual Get started, Connect the base station

Page 8

3 Get started

Caution

•• Ensure you have read the safety instructions in the “Important” section before you connect and install your handset.

Connect the base station

Warning

•• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the phone.

•• Use only the supplied power adapter to charge the batteries.

Note

•• If you subscribe to the digital subscriber line (DSL) high speed internet service through your telephone line, ensure you install a DSL filter between the telephone line cord and the power socket.. The filter prevents noise and caller ID problems caused by the DSL interference. For more information on the DSL filters, contact your DSL service provider.

Connect each end of the power adapter to (for multi handset version only):

•the DC input jack at the bottom of the extra handset charger.

•the power socket on the wall.

8EN

Image 8

Contents Register your product and get support at CD280 CD285EC Declaration of Conformity Contents To avoid damage or malfunction Power requirementsVoltages, as defined in the standard EN 60950 Congratulations on your purchase and welcome to Philips What is in the boxHandset Charger Power adapter Overview of the phone EarpieceOn the handset screen Directly above the keyDisplay icons It flashes when there is a new voice messageIt displays when you ncrease and decrease the volume Get started Connect the base stationInstall the handset Set the date and timeCharge the handset Press OK to confirmCheck the battery level What is standby mode?Check the signal strength Switch your handset On/OffCalls Make a callAdjust the earpiece volume Answer a callMute the microphone Turn the speaker on or offToggle between two calls Make a conference call with the external callersYou can toggle your calls in these ways Press and or Press , then orMake a call to another handset Transfer a callMake a conference call While you are on the phoneDuring an external call During the conference callText and numbers Enter text and numbersSwitch between the upper case and lower case Phone settings Sound settingsName the handset Set the display languageECO mode »» ECO is displayed in standby modeSet the docking tone Set the sound profileAlarm clock Set the alarmTurn off the alarm When the alarm ringsServices Dial modeAuto conference Select the recall durationManage the area code Network typeUnregister the handsets Restore default settingsRegister the handsets Default settings Receiver volume VolumeLanguage Country dependent Handset name LevelTechnical data DisplayFrequently asked questions Handset does not ringDeclaration of conformity Compliance with EMFDisposal of your old product and batteries Manufacturer’s instructionsPage 1999/5/EC Richtlijn 1999/5/EGDirective 1999/5/CE Som framgår av direktiv 1999/5/EG0168