Tip
•• When there is a missed call, a notification message appears.
End a call
You can end a call in these ways:
•Press 
; or
•Place the handset to the base station or charging cradle.
Adjust the earpiece/speaker volume
Press 
/ 
on the handset to adjust the volume during a call.
»»The earpiece/speaker volume is adjusted and the phone is back to the call screen.
Mute the microphone
1 Press 
during a call.
»»The handset displays [Mute on].
»»The caller cannot hear you, but you can still hear his voice.
2 Press 
again to unmute the microphone.
»»You can now communicate with the caller.
Turn the speaker on or off
Press 
.
Make a second call
Note
•• This service is network dependent.
1 Press 
during a call.
»»The first call is put on hold.
2 Dial the second number.
»»The number displayed on the screen is dialed out.
Answer a second call
Note
•• This service is network dependent.
When there is a periodical beep to notify you of an incoming call, you can answer the call in these ways:
1 Press 
and 
to answer the call. »»The first call is put on hold, and you
are now connected to the second call.
2 Press 
and 
to end the current call and answer the first call.
Switch between two calls
Note
•• This service is network dependent.
You can switch your calls in these ways:
•Press 
and 
; or
•Press [Option] and select [Switch calls], then press [OK] again to confirm.
»»The current call is put on hold, and you are now connected to the other call.
EN 15