Philips M888 manual Dial mode, First ring, Auto clock, Register additional handsets

1	Select [Menu].
2	Press / to select , then press [OK]
3	to confirm.
	Select [Recall time], then press [OK] to
4	confirm.
	Select an option, then press [OK] to

confirm.

»»The setting is saved.

Dial mode

Note

•• This feature is country dependent and only applies to models that support both tone and pulse dial.

Dial mode is the telephone signal used in your country.The phone supports tone (DTMF) and

pulse (rotary) dial. Consult the service provider
for detailed information.
1	Select [Menu].
2	Press / to select , then press [OK]
3	to confirm.
	Select [Dial mode], then press [OK] to
4	confirm.
	Select an option, then press [OK] to

confirm.

»»The setting is saved.

First ring

If you have subscribed to the caller ID service with your service provider, your phone can cancel the first ring before the caller ID is displayed on the screen. After the phone is reset, it can detect automatically if there is a caller subscription and start to cancel the first ring.You can change this setting to suit your preference.This feature only applies to models with first ring support.

Turn the first ring on/off

1	Select [Menu].
2	Press / to select , then press [OK]
3	to confirm.
	Select [First ring], then press [OK] to
4	confirm.
	Select [On]/[Off], press [OK] to confirm.

»»The setting is saved.

Note

•• To reset the first ring status, go to the reset menu.

Auto clock

Note

•• This service is network dependent.

•• Make sure you have subscribed to the caller ID service before you use this feature.

It synchronizes the date and time on your phone with the public switched telephone

network (PSTN) automatically. For the date to

be synchronized, make sure the current year is set.

1	Select [Menu].
2	Press / to select , then press [OK]
3	to confirm.
	Select [Auto clock], then press [OK] to
4	confirm.
	Select [On]/[Off]. then press [OK] to

confirm.

»»The setting is saved.

Register additional handsets

You can register additional handsets to the base station.The base station can register up to 4 handsets.

40EN