Philips M888 manual Unregister handsets, Restore default settings, Auto registration

Auto registration

Extra handsets of the same model can be auto- registered. Place the unregistered handset on the base station.

»»The handset detects the base station and registers automatically.

»»Registration is complete in less than two minutes.The base station automatically assigns a handset number to the handset.

Manual registration/Pairing

If auto registration fails or if you register a
handset of a different model, register your
handset manually to the base station.
1	Select [Menu].
2	Press / to select , then press [OK]
3	to confirm.
	Select [Register], then press [OK] to
4	confirm.
	Press and hold on the base station for
5	5 seconds.
	Enter the system PIN/passcode. Press
6	[Clear] to make corrections.
	Press [OK] to confirm the PIN/passcode.

»»Registration is complete in less than 2 minutes.

Note

•• If the PIN/passcode is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.

•• The preset PIN/passcode is 0000. No change can be made on it.

Unregister handsets

1	If two handsets share the same base
	station, you can unregister a handset with
2	another handset.
	Select [Menu].
3	Press / to select , then press [OK]
4	to confirm.
	Select [Unregister], then press [OK] to
5	confirm.
	Select the handset to be unregistered.
6	Press [OK] to confirm.

»»The handset is unregistered.

Restore default settings

You can reset your phone settings to the
original factory settings.
1	Select [Menu].
2	Press / to select , then press [OK]
3	to confirm.
	Select [Reset], then press [OK] to confirm.
	»»A confirmation request is displayed on
4	the handset.
	Press [OK] to confirm.
	»»All settings are reset.

EN 41