Philips MAGIC5 user manual Checking the Firmware Version, Using Service Codes, Power Cycling

Page 26

4Lightly wipe the upper side of the scanner glass (A) and the lower side of the document feeder/scanner film (= white plastic plate) (B) with a cloth.

EN

5Clean the feed roller (A) and the underside of the sup- port pad of the feeder roller (B) with a soft, lint-free cloth moistened with cleaning alcohol (96 percent). Rotate the feed roller; You must clean the entire roller.

6Close the scanner cover and the cover of the automatic document feeder. Both the supports must securely snap into place.

7Turn the blue gear wheel forward to tension the ink film. The ink film must not have any creases.

8Close the device. Insert the paper tray in the opening provided for it behind the paper feeder. Insert paper again.

Checking the Firmware Version

1Press OK, 47 and OK.

2The model designation and the configured country ap- pear on the display.

3Confirm with OK.

4The information on the firmware version of the device is displayed.

5Confirm with OK.

Using Service Codes

The service codes delete all the changed settings and your device is reset to factory settings. It may be possible that the device with the changed settings reacts differently than ex- pected.

Only use the service codes if this is absolutely neces- sary. Some service codes also delete saved messages and telephone book entries.

1Press OK, 45 and OK.

2Enter a service code:

7117—Deletes all changed settings and saved data. The device is reset to factory settings and the initial instal- lation process is started.

7140—Deletes all changed settings. Saved data and telephone book entries remain intact.

7227—Deletes saved faxes, when there are prob- lems with printing.

3Confirm using OK.

4Dial using [ SURE: YES.

5Confirm using OK.

If you have entered the incorrect code, you can cancel the entry with SURE: NO.

Power Cycling

If a problem occurs that cannot be corrected with the in- structions in this user manual (see also the help below), fol- low the steps given here.

1Pull out the power plug.

2Wait at least ten seconds, then plug the power plug back into the socket.

3If the error occurs again, please contact our technical customer service or your retailer. Follow the instruc- tions on the display and on the error report.

26

Philips PPF 631 · 632

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Page Symbols Used Dear CustomerConnecting the Handset Installation GuidePackage Contents Attaching the Paper TrayInitial Installation Connecting the Telephone CableConnecting the Power Cable Overview Overview of the Menu FunctionsDevice Overview Panel PhotoPower Supply General Safety InformationSetting Up the Machine RepairsTable of Contents Telephone Functions Groups Short DiallingFunction is not supported in all countries and networks Calling Line Identification ClipMissed Calls Manually Sending a Fax FaxSending a Fax Direct inward dialling or selecting sub-addressBroadcasting Delayed Fax TransmissionListening while a connection is es- tablished Receiving FaxesUsing Fax Templates Creating a Copy CopierInserting Documents Creating Multiple CopiesFun and Games SudokuSettings Setting the Fax Switch Printing Lists and Help PagesHelp 5 · Copier Starting the Initial InstallationHelp 4 · Fax Transmission Help 6 · Function ListUsing Additional Telephones Ea- sylink Configuring Telephone Lines and ServicesConnecting Additional Devices Telephone Lines and Additional DevicesChanging Code Using an External Answering MachineTaking Over the Line Checking the Ink Film Reserve ServiceService Changing the ink filmFixing a Paper Jam Cleaning Fixing a Document JamChecking the Firmware Version Using Service CodesPower Cycling General information Problems when faxing or printingProblems with the connection Appendix Technical DataGuarantee Declaration of Conformity DoC AppendixPhilips PPF 631 · Appendix United Kingdom Customer InformationUnited Kingdom PPF 631 · 253056155-A
Top Page Image Contents