Philips SE 745 manual Install your phone, Install battery Warning, Charge battery Warning

Page 15

and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base.

Warning

The base station does not have an ON/OFF switch. Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible.

The power adaptor and telephone line cord have to be connected correctly, as incorrect connection could damage the unit.

Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone.

4.2 Install your phone

Before using the handset, the batteries have to be installed and fully charged.

4.2.1Install battery Warning

Always use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.

1 Slide out the battery cover.

2Place the batteries in the correct polarity as indicated and replace the cover.

4.2.2Charge battery Warning

The handset must be charged for at least 24 hours before using it for the first time.

When the battery level becomes low, an empty battery icon is displayed on the screen.

If the battery level becomes exceedingly low, the phone automatically switches off and any function in progress will not be saved.

1Place the handset on the charging cradle of the base station. A melody is emitted if the handset is placed correctly.

2The battery icon on the display blinks during charge.

3The battery icon becomes steady when the handset is fully charged.

Note

Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time.

4.3Welcome mode Note

Depending on your country, the WELCOME screen may not appear. In this case, you are not required to select your country/operator/

language settings.

Warning

You cannot make outgoing calls or receive incoming calls without first defining your country selection.

Before you first use your handset, you need to configure it according to the country of use. After charging it for a few minutes, the word WELCOME appears in various languages. Follow these steps to configure your phone:

1Scroll :to the word WELCOME in your preferred language and press mSELECT to confirm your selection.

2Scroll :to your country.

3Press mSELECT to confirm your selection.

4Press :to your operator (if necessary).

5Press mSELECT again to confirm your selection.

The default line settings and menu language for the selected country will be automatically configured.

To set date/time, see “Set Date and Time” on page 25.

Your phone is now ready for use.

Getting started

13

Image 15
Contents EN Telephone Answering Machine Page Table of contents Telephone answering machine Advanced settingsTechnical data Frequently asked questions Index GamesInterference Information Safety informationNotification to the Local Telephone Company Your telephone from your lineFCC RF Radiation Exposure Statement Conformity Power requirementsBattery life may be shortened in low temperature conditions Important in rural areas Electrician, as appropriateService Centers Electric, Magnetic and Electromagnetic Fields EMFRecycle your batteries Congratulations on your purchase and welcome to Philips Your phoneRight Softkey Overview of your phone Earpiece Event LEDDisplay Left Softkey mCall transfer key & Intercom key c Microphone Loudspeaker Battery door DangerRinger on/off key & Pause key # Loudspeaker keyDisplay icons On/Off key o Volume keysOverview of the base station Play/Stop key P Message counterConnect the base station Install the base supportConnect the line cord and power cable Getting startedWelcome mode Note Install your phoneInstall battery Warning Charge battery WarningPersonal Set Clock & AlarmMenu structure PhonebookSnake Tetris Answ. Mode Answ. & RecordAns. On/Off Ans. Settings Ring Delay Advanced SetUsing your phone Handsfree answering Answer a callCall is established End a callUse more of your phone Initiate a second call subscription dependent Adjust loudspeaker volumeActivate/deactive XHD Sound mode Using your PhonebookDelete a phonebook entry Access phonebookDirect Access Memory Store a contact in the phonebookStore Direct Access Memory Delete Direct Access MemoryStored number is displayed if any Save a redial number into the phonebook Using the Redial listAccess Redial list Transfer phonebookDelete the redial list Using the Call logAccess Call log Using the IntercomEstablish a three-party conference call Switch between an internal and external callTransfer an external call to another Handset Answer an external call during intercomDo not Disturb mode Clock and Alarm settingsSet Alarm Set Alarm ToneSet allowed caller Activate/Deactivate Do not Disturb modeSet Day of Do not Disturb mode Set Time of Do not Disturb modePersonal settings Change the Display Language Babysit modeSet Contrast Level Change the Handset NameMSELECT Activate Babysit Mode NoteDeactivate Babysit Mode Set Backlight timeAdvanced settings Baby Call To activate Baby Call modeTo deactivate Baby Call mode To modify Call Barring numberChange Master PIN Reset UnitSelect best Base Station Unregister a handsetLast stored prefix number is displayed if any Activate/Deactivate Conference modeSet Auto Prefix Last stored detect string is displayed if anyTo set 1st Ring Activate/Deactivate XHD Sound modeDefault settings Record modePlay Tetris game GamesPlay Snake game An instruction screen is displayedPlay Playback of new messages via handset Telephone answering machine TAMMemo recording Set the Answer modePlayback of old messages via handset Delete all messagesSwitch the Answering Machine On/ Off via handset Answering Machine settings Ring DelayRemote Control Access Call Screening Set Handset Call Screening Activate/Deactivate Remote AccessControlling the Answering Machine from an external call PressCurrent selected language is highlighted Set Voice LanguageTechnical data Communication is lost during a call Connection Handset does not switch onHandset does not charge Icon is not blinking during chargePhone hangs up during remote access Handset warms up when making a long callMy handset keeps going into idle mode Remote control access does not workIndex