Philips SE 745 manual Transfer an external call to another Handset

Page 26

2If there are more than 2 registered handsets,

the handset numbers which are available for intercom will be displayed. Scroll :to All Handsets and press mSELECT to call all the handsets or scroll :to the specific

handset you want to call and press mSELECT.

6.10.2Transfer an external call to another

handset

1During the call, press and hold ckey to put the external call on hold (the caller can no longer hear you).

•Intercom is established immediately if there are only 2 registered handsets.

2If there are more than 2 registered handsets,

the handset numbers which are available for intercom will be displayed. Scroll :to All Handsets and press mSELECT to call all the handsets or scroll : to the specific

handset you want to call and press mSELECT.

•The called handset rings.

3Press rkey on the called handset to answer the internal call, where both internal callers can talk.

•Intercom is established.

4Press ekey on the first handset to transfer the external call to the called handset.

•The external call is transferred.

Note

If there is no answer from the called handset, press ckey to resume the external call.

6.10.3Answer an external call during intercom

1When there is an incoming external call during an intercom, a new call tone is emitted.

2To answer the external call and end the intercom, press r.

• Connection with the external call is established.

Tip

To put the internal call on hold and answer the incoming external call, press ckey.

6.10.4Switch between an internal and external call

To switch between an internal or external call, press ckey.

6.10.5 Establish a three-party conference call

The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.

1During the call, long press ckey to put the external call on hold (the caller can no longer hear you).

•Intercom is established immediately if there are only 2 registered handsets.

2If there are more than 2 registered handsets,

the handset numbers which are available for intercom will be displayed. Scroll :to All Handsets and press mSELECT to call all the handsets or scroll : to the specific

handset you want to call and press mSELECT.

•The called handset rings.

3Press rkey on the called handset to answer the internal call, where both internal callers can talk.

•Intercom is established.

4Press and hold ckey for 2 seconds on the first handset to start the three-party conference.

•CONFERENCE will be displayed on the

screen once the conference call is established.

Tip

If CONFERENCE mode is activated (see “Activate/Deactivate Conference mode” on page 33), a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress.

24

Use more of your phone

Page 25 Page 27
Image 26
Page 25 Page 27
Contents EN Telephone Answering Machine Page Table of contents Games Advanced settingsTechnical data Frequently asked questions Index Telephone answering machineYour telephone from your line Safety informationNotification to the Local Telephone Company Interference InformationFCC RF Radiation Exposure Statement Important in rural areas Electrician, as appropriate Power requirementsBattery life may be shortened in low temperature conditions ConformityRecycle your batteries Service CentersElectric, Magnetic and Electromagnetic Fields EMF Your phone Congratulations on your purchase and welcome to PhilipsLeft Softkey m Overview of your phone Earpiece Event LEDDisplay Right SoftkeyLoudspeaker key Microphone Loudspeaker Battery door DangerRinger on/off key & Pause key # Call transfer key & Intercom key cDisplay icons Message counter Volume keysOverview of the base station Play/Stop key P On/Off key oGetting started Install the base supportConnect the line cord and power cable Connect the base stationCharge battery Warning Install your phoneInstall battery Warning Welcome mode NotePhonebook Clock & AlarmMenu structure Personal SetAdvanced Set Answ. Mode Answ. & RecordAns. On/Off Ans. Settings Ring Delay Snake TetrisUsing your phone End a call Answer a callCall is established Handsfree answeringUse more of your phone Using your Phonebook Adjust loudspeaker volumeActivate/deactive XHD Sound mode Initiate a second call subscription dependentStore a contact in the phonebook Access phonebookDirect Access Memory Delete a phonebook entryStored number is displayed if any Store Direct Access MemoryDelete Direct Access Memory Transfer phonebook Using the Redial listAccess Redial list Save a redial number into the phonebookUsing the Intercom Using the Call logAccess Call log Delete the redial listAnswer an external call during intercom Switch between an internal and external callTransfer an external call to another Handset Establish a three-party conference callSet Alarm Tone Clock and Alarm settingsSet Alarm Do not Disturb modeSet Time of Do not Disturb mode Activate/Deactivate Do not Disturb modeSet Day of Do not Disturb mode Set allowed callerPersonal settings Change the Handset Name Babysit modeSet Contrast Level Change the Display LanguageSet Backlight time Activate Babysit Mode NoteDeactivate Babysit Mode MSELECTAdvanced settings To modify Call Barring number To activate Baby Call modeTo deactivate Baby Call mode Baby CallUnregister a handset Reset UnitSelect best Base Station Change Master PINLast stored detect string is displayed if any Activate/Deactivate Conference modeSet Auto Prefix Last stored prefix number is displayed if anyRecord mode Activate/Deactivate XHD Sound modeDefault settings To set 1st RingAn instruction screen is displayed GamesPlay Snake game Play Tetris gameTelephone answering machine TAM Play Playback of new messages via handsetDelete all messages Set the Answer modePlayback of old messages via handset Memo recordingRemote Control Access Switch the Answering Machine On/ Off via handsetAnswering Machine settings Ring Delay Press Activate/Deactivate Remote AccessControlling the Answering Machine from an external call Call Screening Set Handset Call ScreeningSet Voice Language Current selected language is highlightedTechnical data Icon is not blinking during charge Connection Handset does not switch onHandset does not charge Communication is lost during a callRemote control access does not work Handset warms up when making a long callMy handset keeps going into idle mode Phone hangs up during remote accessIndex
Top Page Image Contents