Philips SE 745 manual Paging, Clock and Alarm settings, Set Date and Time, Set Alarm Tone

Page 27

6.11 Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

1Press pkey on the base station.

• All the registered handsets start to ring.

2Once retrieved, press any key on the handset to end the paging.

Note

If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode.

Tip

To stop paging, press pkey on the base station again.

6.12 Clock and Alarm settings

This feature allows you to set the date, time and alarm settings for your phone. The default date and time is 01/01/07 and 00:00 respectively.

6.12.1Set Date and Time

1Press m MENU in idle mode, scroll :to Clock & Alarm and press mSELECT, press mSELECT again to enter Set Date/Time.

2Enter the current time (HH:MM) and current date (DD/MM/YY) and press mOK.

• A validation tone is emitted.

Note

Enter the date in Day/Month/Year format and the time in 24-hour format.

An error tone will be emitted if an invalid digit is entered in the date/time fields.

Hour: 00 to 23; Minute: 00 to 59

Month: 01 to 12; Date: 01 to 31 (except for February)

Warning

If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.

6.12.2Set Alarm

1Press m MENU in idle mode, scroll :to Clock & Alarm and press mSELECT, scroll :to Alarm and press mSELECT.

2Scroll :to Off, On Once or On Daily and press mSELECT.

3If you select On Once or On Daily, enter the

time (HH:MM) for the alarm and press mOK.

• A validation tone is emitted.

Note

The alarm tone and alarm icon will only sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset.

6.12.3Set Alarm Tone

1Press m MENU in idle mode, scroll :to Clock & Alarm and press mSELECT, scroll :to Alarm Tone and press mSELECT.

2Scroll :to Melody 1, Melody 2 or Melody 3 to play the melody.

3Press mSELECT to set the alarm tone.

• A validation tone is emitted.

6.12.4Do not Disturb mode

This feature is available only if you have subscribed to Caller Line Identification (CLI) service from your network provider. When Do not Disturb mode is activated, the phone will ring only when there are calls received from authorised groups. For all other callers, the phone will display an incoming call message or the backlight will be turned on, but it will not ring. If the telephone answering machine is activated, it will answer the call to allow the caller to leave a message.

Note

By default, Do not Disturb mode is Off.

Use more of your phone

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents EN Telephone Answering Machine Page Table of contents Telephone answering machine Advanced settingsTechnical data Frequently asked questions Index GamesInterference Information Safety informationNotification to the Local Telephone Company Your telephone from your lineFCC RF Radiation Exposure Statement Conformity Power requirementsBattery life may be shortened in low temperature conditions Important in rural areas Electrician, as appropriateService Centers Electric, Magnetic and Electromagnetic Fields EMFRecycle your batteries Congratulations on your purchase and welcome to Philips Your phoneRight Softkey Overview of your phone Earpiece Event LEDDisplay Left Softkey mCall transfer key & Intercom key c Microphone Loudspeaker Battery door DangerRinger on/off key & Pause key # Loudspeaker keyDisplay icons On/Off key o Volume keysOverview of the base station Play/Stop key P Message counterConnect the base station Install the base supportConnect the line cord and power cable Getting startedWelcome mode Note Install your phoneInstall battery Warning Charge battery WarningPersonal Set Clock & AlarmMenu structure PhonebookSnake Tetris Answ. Mode Answ. & RecordAns. On/Off Ans. Settings Ring Delay Advanced SetUsing your phone Handsfree answering Answer a callCall is established End a callUse more of your phone Initiate a second call subscription dependent Adjust loudspeaker volumeActivate/deactive XHD Sound mode Using your PhonebookDelete a phonebook entry Access phonebookDirect Access Memory Store a contact in the phonebookStore Direct Access Memory Delete Direct Access MemoryStored number is displayed if any Save a redial number into the phonebook Using the Redial listAccess Redial list Transfer phonebookDelete the redial list Using the Call logAccess Call log Using the IntercomEstablish a three-party conference call Switch between an internal and external callTransfer an external call to another Handset Answer an external call during intercomDo not Disturb mode Clock and Alarm settingsSet Alarm Set Alarm ToneSet allowed caller Activate/Deactivate Do not Disturb modeSet Day of Do not Disturb mode Set Time of Do not Disturb modePersonal settings Change the Display Language Babysit modeSet Contrast Level Change the Handset NameMSELECT Activate Babysit Mode NoteDeactivate Babysit Mode Set Backlight timeAdvanced settings Baby Call To activate Baby Call modeTo deactivate Baby Call mode To modify Call Barring numberChange Master PIN Reset UnitSelect best Base Station Unregister a handsetLast stored prefix number is displayed if any Activate/Deactivate Conference modeSet Auto Prefix Last stored detect string is displayed if anyTo set 1st Ring Activate/Deactivate XHD Sound modeDefault settings Record modePlay Tetris game GamesPlay Snake game An instruction screen is displayedPlay Playback of new messages via handset Telephone answering machine TAMMemo recording Set the Answer modePlayback of old messages via handset Delete all messagesSwitch the Answering Machine On/ Off via handset Answering Machine settings Ring DelayRemote Control Access Call Screening Set Handset Call Screening Activate/Deactivate Remote AccessControlling the Answering Machine from an external call PressCurrent selected language is highlighted Set Voice LanguageTechnical data Communication is lost during a call Connection Handset does not switch onHandset does not charge Icon is not blinking during chargePhone hangs up during remote access Handset warms up when making a long callMy handset keeps going into idle mode Remote control access does not workIndex
Top Page Image Contents