8 Advanced settings
8.1 Change Recall time
Recall time (or dial delay) is the time delay by which the line will be disconnected after you press rkey. It can be set to short, medium or long.
The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.
Note
This setting is useful when using network services. The use of some services accessed with [r + 1] , [r + 2] , [r + 3] (call waiting, call forward...) will depend on your recall time setting. Please contact your network provider for more details on this feature.
1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, press mSELECT to enter Recall Time.
2Scroll :to Short, Medium or Long and press mSELECT to confirm.
•A validation tone is emitted and the screen returns to previous menu.
8.2Change the Dial Mode
The default value for dial mode that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.
1Press mMENU in idle mode, scroll : to Advanced Set and press mSELECT, scroll : to Dial Mode and press mSELECT.
2Scroll : to Tone or Pulse and press mSELECT to confirm.
• A validation tone is emitted and the screen returns to previous menu.
8.3Set Area Code
This feature is useful when you have subscribed to Caller Line Identification service. It allows you to set an area code in your SE745. Once the local
area code is set, the phone automatically filters the area code for all incoming calls, by removing the area code for local calls and retaining the area code for calls from other areas.
If it is a local call, then only the phone number of the caller is displayed during an incoming call or when you call the number from the call log. If it is a long distance call, then both the area code and phone number will be displayed in a proper format to be dialled out directly from the call log, or saved into the phonebook.
Note
You can enter a maximum of 4 digits for the area code.
You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. See “Using the Call log” on page 23 for details.
1Press mMENU in idle mode, scroll : to Advanced Set and press mSELECT, scroll : to Area Code and press mSELECT.
2Enter the local area code (maximum 4 digits) and press mOK to save.
• A validation tone is emitted and the screen returns to previous menu.
8.4Call Barring
Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain digits. You can set up to 4 different barring numbers, with each number containing up to 4 digits.
8.4.1To activate/deactivate Call Barring
1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll : to Call Barring and press mSELECT.
2Enter the Master PIN when prompted and press mOK to confirm.
Note
By default, the Master PIN is 0000.
3Press mSELECT to enter Barring Mode.
4Scroll :to On or Off and press mSELECT to confirm.
•A validation tone is emitted and the screen returns to previous menu.
30 | Advanced settings |