Philips SE 745 manual Connection Handset does not switch on, Handset does not charge

Page 44

12 Frequently asked questions

www.philips.com/support

In this chapter, you will find the most frequently asked questions and answers about your phone.

Connection

The handset does not switch on!

•Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on.

The handset does not charge!

• Check charger connections.

icon is not blinking during charge!

•Battery is full: There is no need to charge the battery.

•Bad battery contact: Adjust the handset slightly.

•Dirty contact: Clean the batteries contact with a dry cloth.

•Wrong batteries installed: Use only AAA rechargeable batteries supplied with your unit There could be risk of battery leakage if you use alkaline batteries or other battery types.

Communication is lost during a call!

•Charge the battery

•Move closer to the base station.

The phone is "Out of range"!

• Move closer to the base station.

Warning batt. is displayed on handset!

•Use only AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.

Set-up

Searching... is displayed on handset and icon is blinking!

•Move closer to the base station.

•Make sure that your base station is on.

•Reset your unit and restart handset registration (see “Registration” on page 31).

Sound

Handset does not ring!

Check that the Ring Volume is not set to Silence, and make sure icon is not displayed on the screen (see “Set the Ring Volume” on page 27).

Caller cannot hear me at all!

Microphone may be muted: During a call, press

mUNMUTE.

There’s no dialling tone!

•No power: Check the connections.

•Batteries are empty: Charge the batteries.

•Move closer to the base station.

•Wrong line cable used: Use the line cable provided.

•Line adaptor is required: Connect the line adaptor to the line cord.

Caller cannot hear me clearly!

•Move closer to the base station.

•Move the base station at least one metre away from any electronic appliances.

Frequent noise interference on my radio or television!

•Move the base station as far away as possible from the electrical appliances.

42	Frequently asked questions

Image 44

Contents EN Telephone Answering Machine Page Table of contents Advanced settings Technical data Frequently asked questions IndexGames Telephone answering machineSafety information Notification to the Local Telephone CompanyYour telephone from your line Interference InformationFCC RF Radiation Exposure Statement Power requirements Battery life may be shortened in low temperature conditionsImportant in rural areas Electrician, as appropriate ConformityRecycle your batteries Service CentersElectric, Magnetic and Electromagnetic Fields EMF Your phone Congratulations on your purchase and welcome to PhilipsOverview of your phone Earpiece Event LED DisplayLeft Softkey m Right SoftkeyMicrophone Loudspeaker Battery door Danger Ringer on/off key & Pause key #Loudspeaker key Call transfer key & Intercom key cDisplay icons Volume keys Overview of the base station Play/Stop key PMessage counter On/Off key oInstall the base support Connect the line cord and power cableGetting started Connect the base stationInstall your phone Install battery WarningCharge battery Warning Welcome mode NoteClock & Alarm Menu structurePhonebook Personal SetAnsw. Mode Answ. & Record Ans. On/Off Ans. Settings Ring DelayAdvanced Set Snake TetrisUsing your phone Answer a call Call is establishedEnd a call Handsfree answeringUse more of your phone Adjust loudspeaker volume Activate/deactive XHD Sound modeUsing your Phonebook Initiate a second call subscription dependentAccess phonebook Direct Access MemoryStore a contact in the phonebook Delete a phonebook entryStored number is displayed if any Store Direct Access MemoryDelete Direct Access Memory Using the Redial list Access Redial listTransfer phonebook Save a redial number into the phonebookUsing the Call log Access Call logUsing the Intercom Delete the redial listSwitch between an internal and external call Transfer an external call to another HandsetAnswer an external call during intercom Establish a three-party conference callClock and Alarm settings Set AlarmSet Alarm Tone Do not Disturb modeActivate/Deactivate Do not Disturb mode Set Day of Do not Disturb modeSet Time of Do not Disturb mode Set allowed callerPersonal settings Babysit mode Set Contrast LevelChange the Handset Name Change the Display LanguageActivate Babysit Mode Note Deactivate Babysit ModeSet Backlight time MSELECTAdvanced settings To activate Baby Call mode To deactivate Baby Call modeTo modify Call Barring number Baby CallReset Unit Select best Base StationUnregister a handset Change Master PINActivate/Deactivate Conference mode Set Auto PrefixLast stored detect string is displayed if any Last stored prefix number is displayed if anyActivate/Deactivate XHD Sound mode Default settingsRecord mode To set 1st RingGames Play Snake gameAn instruction screen is displayed Play Tetris gameTelephone answering machine TAM Play Playback of new messages via handsetSet the Answer mode Playback of old messages via handsetDelete all messages Memo recordingRemote Control Access Switch the Answering Machine On/ Off via handsetAnswering Machine settings Ring Delay Activate/Deactivate Remote Access Controlling the Answering Machine from an external callPress Call Screening Set Handset Call ScreeningSet Voice Language Current selected language is highlightedTechnical data Connection Handset does not switch on Handset does not chargeIcon is not blinking during charge Communication is lost during a callHandset warms up when making a long call My handset keeps going into idle modeRemote control access does not work Phone hangs up during remote accessIndex