Datalogic Scanning Industrial PDA manual Flashing RED

Page 32

Troubleshooting

Problem

Possible Cause

 

Solution

 

 

 

 

 

 

 

Time-out fault: the

In either case, if the Spare Battery LED is

 

spare battery pack

flashing red, do the following:

 

charging has

1.

Disconnect the AC adapter from the dock.

 

exceeded the maxi-

 

2.

Remove the spare battery pack and the

 

mum time-out period.

 

 

Pegaso from the dock.

 

 

 

 

3.

Connect the AC adapter to the dock.

The Spare Battery

 

4.

If the Spare Battery LED is flashing red,

LED on the dock is

Over-voltage fault: the

there is a problem with the dock. Disconnect

flashing RED.

spare battery pack

the AC adapter from the dock and contact a

 

charging has

service technician.

 

5.

If the Spare Battery LED is off, insert a dif-

 

exceeded the maxi-

 

mum charge voltage

ferent spare battery pack in the dock.

 

of the battery.

6.

Otherwise, there is a problem with the first

 

 

spare battery pack. Discontinue use of the first

 

 

spare battery pack. Refer to the PRG for

 

 

instructions on battery disposal.

 

 

 

 

30

Pegaso™ Industrial PDA with Windows® CE

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Industrial PDA Disclaimer Table of Contents Appendix a Microsoft Windows CE Industry Canada statementFeatures OverviewTriggers Getting Started Powering the PegasoBattery Pack Powering the Pegaso Installing the Battery Pack Do not expose the battery to liquids, or allow to get wetSystem Tray Battery Status Indicators Battery PowerSystem Tray Battery Status Indicators Battery Icon Description Status Charging Battery Charging Methods and Indications Charging the BatteriesPull Upward to Remove USB/Serial Connector Charging with the DockBackup Battery Setting Up the Mobile ComputerCharging with a Battery Charger Bluetooth Setup Connecting to a PC IP Network SetupTouchscreen Calibration Getting ConnectedRF Setup Summit Client Utility Modifying Network Connection SettingsSetting the Date and Time Using the StylusCommand Bar Navigating the DisplayAmbient Light Sensor Screen ProtectorTask Bar Application NavigationSoft Keypad/Input Panel TranscriberSystem Tray Keyboard Indicators Input States and their System Tray IndicatorsKeypad Keypad Overview Special KeysKey Keypad Alpha Characters and Symbols Key KeypadKey Keymap Scanning Bar Codes Laser ScanningPersistent Memory Persistent MemoryContext Sensitive Help Resetting the PegasoWarm Reset Cold Reset After Warm ResetProcedure to Safe Reset Safe ResetAfter Cold Reset After Safe Reset Maintaining the PegasoTroubleshooting Troubleshooting Problems, Causes, and SolutionsNot accept scan Flashing RED RF Connectivity Troubleshooting StartTechnical Support ResourcesDatalogic Mobile Website Support Reseller Technical Support Telephone Technical SupportQuick Start Install Avalanche SEInstallation Requirements RAM Access the Avalanche SE Console Connect To Your Mobile Devices Additional Console InformationManage Mobile Devices Configure Network and Wireless Settings Additional FunctionalityInstall Additional Software Packages Connect to Devices Using Remote Control Quick Reference Guide Additional Resources Definitions Transfers, Support Infringement Government Restricted Rights International Use Quick Reference Guide Appendix a Microsoft Windows CE End User License Agreement Quick Reference Guide Datalogic Mobile Pegaso Windows CE Product Warranty Assignment Laser Safety Label Laser Safety LabelRegulatory Statements Advisory StatementIndustry Canada statement Radiation Exposure StatementPegaso Industrial PDA with Windows CE English FrenchGerman ItalianSwedish DanishDutch Finnish NorwegianPortuguese SpanishChinese Japanese Europe EU Declaration of Conformity 0560 Declaration of Conformity Page Datalogic Mobile, Inc
Top Page Image Contents