Casio IT-700/70 manual Wall Mounting the Optical Communication Unit

Page 40

Wall Mounting the Optical Communication Unit

You can use the Wall Mount Unit that comes with the Optical Communication Unit to configure it for wall mounting.

1. Attach the terminal support to the Optical Communication Unit.

2. Secure the terminal support in place with the two screws.

3.Remove the two screws holding the hook in place. Next, move the hook to the right side screw holes and secure it in place with the screws.

Left side Right side (Move hook here for wall-mounting.)

The illustration on the right shows when the hook on the Optical Communication Unit is removed.

4.Remove the two screws (top and bottom) that secure the base of the Optical Communication Unit.

38

Image 40
Contents Getting Started with the Pocket PC Terminal Hardware Manual Page Safety Precautions Markings and SymbolsPrecautions During Use Disassembly and ModificationForeign Objects Dropping and DamageMoisture LocationOptional Lithium-ion Battery Pack LCD ScreenPage Backup Battery Handling AC Power Supply Backup Copies of All Important Data Optional Laser Scanner CardOperating Precautions Unit 6, 1000 North Circular Road London NW2 7JD, U.K Member states with restrictive use Page Contents Using a CompactFlash Card Computer System Requirements System RequirementsPage System Diagram Option List Non-U.S. Market ModelsIT-700/70 Series Options U.S. Market Models General Guide Houses the memory backup lithium battery. You do not need to Setting Up the Pocket PC Terminal Adjusting Screen ContrastAdjusting Screen Brightness IT-700M30E/M30RC Aligning the Touch ScreenConfiguring the Auto Dimmer IT-700M30E/M30RC Enabling and Disabling the Backlight IT-70M30E/M30RCUsing IR Data Communication Power Requirements Replacing the Main BatteryTo replace the Standard Battery Pack Replacing the Backup Battery To replace a Large-capacity Battery PackPage When no memory abnormality is discovered Resetting the Pocket PC TerminalWhen a memory abnormality is discovered Full Reset Memory Initialization Performing a Full ResetPage Installing the Hand Strap IT-700/70 Specifications RAM 32MBPage General Guide Using the Optical Communication Unit IT-760IOEBundled items RS-232C Interface Optical Communication Unit Power Requirements Using the Optical Communication UnitPage DIP Switch Settings Connection TypeWall Mounting the Optical Communication Unit Page To daisy chain multiple Optical Communication Units Optical Communication Unit IT-760IOE Specifications Using the Pocket PC Terminal Charger Connection Detector Charger Unit Power Requirements Using the Charger UnitCharge Indicator Wall Mounting the Charger UnitPocket PC Terminal Charger IT-769CHGE Specifications Using the Dual Charger Using the Dual Charger Daisy Chaining Dual Charger Units Dual Charger DT-5022CHG Specifications Using a CompactFlash Card Loading a Card into SlotWith the CompactFlash Card facing upwards, load it into Slot Page Using a Laser Scanner Installing the Laser Scanner Card Reading Bar Codes Page Bar Code Scanning Positions Laser Scanner Card Specifications Standard Battery Pack Specifications Using a Rechargeable Battery PackLarge-capacity Battery Pack Specifications Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan