Chapter 1 Getting Started
Charging the Battery with the Docking Station
1.Plug the AC adapter cable into the power jack on the docking station, then connect the AC adapter into an electrical outlet.
2.Slide the device into the docking station until it clicks into place.
3.The connection is secure when the bottom edge of the device is aligned with the docking station, and the LED indicator on the device lights up red.
LED Status
|
| LED | Meaning | |
|
|
|
|
|
PA600 |
| Solid Red | Charging | |
|
|
|
|
|
|
| Solid Green | Charging complete | |
|
|
|
|
|
Docking |
|
| Power LED | Power is on |
Station |
|
|
|
|
|
| Charging LED | Charging | |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Sync LED | Synchronization is taking place |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon appears on the device screen indicating low or very low battery status. In both cases, perform an Active- Sync operation to back up your data, then recharge your device as soon as possible.
If the battery level reaches low status, the device will enter sleep mode; if the battery level reaches very low status, the device will enter deep sleep mode. In this case, you have about 72 hours to recharge your device after which you risk losing all data on your device’s internal memory.
9