Unitech PA600 user manual WiFi Connection

Chapter 3 Getting Connected

WiFi Connection

Through the use of the SDIO card, you can send and receive signals to a WiFi network then synchronize files.

NOTE: WiFi access requires a separate purchase of a service contract with a wireless service provider. Contact a wireless service provider for more information.

A wireless network can be added either when the network is detected or by manually entering settings information. Before performing these steps, determine if authentication information is needed.

1.Tap Start → Settings, then tap the Connections tab.

2.Tap Network Cards.

The Configure Network Adapters screen appears.

3.Select whether the network card connects to the Internet or your work LAN from the drop-down list.

4.If there are networks already detected, tap and hold network name, then select Connect.

5.Under the Network to access, select from the following network connection options:

–All available

–Only access points

–Only computer-to-computer

6.When finished, tap OK.

For more information on how to configure the wireless network settings, tap Start → Help.

29