•Use 
to select SAVE ENTRY. Press 
.
•The display will show NAME?.
•Use the numeric keys & the 
key to enter the name.
•Press 
to confirm. The redial number will be displayed.
•Edit the number by using the numeric keys & the 
key.
•Press 
to confirm the entry.
•If the new entry would have the same name as a previously entered record in the phonebook, the prompt ‘REPLACE?’ will
be displayed. Press 
, the number of the record in the phonebook record with the same name will be replaced with the new number.
•Press 
to return to standby.
Delete a Redial Number
•Press 
, the last number dialled will be displayed.
•Use 
to scroll through the last 10 dialled numbers.
•Press 
on a selected number.
•Use 
to select DELETE. Press 
.
•The display reads DELETE?. Press 
. The selected number will be deleted.
•The display will return to the redial list.
•Repeat the above steps to delete another dialled number.
•Press 
to exit the redial list.
Note: Refer to Delete All Records section to delete the entire redial log at once.
Making 2nd External Call
This is a network dependent feature.
•During a call, press 
will put the current external call on hold. Dialling tone for the 2nd call can be heard.
•Enter the number you want to dial out by using the keypad.
•When the 2nd call is answered, press 
to toggle between the two callers or activate a conference call with two external parties.
Inserting Pause for PBX System
User can press and hold 
to insert a Pause of 3 seconds. A “
will be shown on the display.
Note: If there is a 
in the predial, phonebook, redial or service number, the handset will pause for the
Receiving External Calls
When receiving an external call, all handsets including the base unit will ring, provided that the ringers are on. The 
icon on the display will blink. The LED on the handset and the In Use LED on the base unit will also blink.
When the handset is on the base unit, lift the handset:
•to answer the call when the AUTO ANS feature is turned on.
•press 
to connect the call if the AUTO ANS feature is turned off. (Refer to section “Auto Answering” for details)
When the handset is not on the base unit:
•Press 
to connect the call.
13 of 42