oIf you do not want to replace the record, press 
to return to name editing mode to edit the name.
Deleting a CID Record
•Press 
on a CID while reviewing the call log.
•Use 
to select DELETE. Press 
.
•The display will read DELETE?.
•Press 
to confirm and the selected CID is deleted.
•If there is no more record in the call log, the display will show EMPTY for 2 seconds and return to standby.
Note: Refer to Delete All Records section to delete the entire call log at once.
Call Back from the Call Log
This feature only works if the CID record contains a valid phone number.
•Press 
during predial or standby to bring out the call log.
•The most recent received CID is displayed.
•If the call log is empty, EMPTY will be displayed for 2 seconds and returned to standby.
•Use 
to scroll through the call log. Press 
on the selected CID to dial out the number.
Using SMS
Incoming SMS (Text) messages will be stored in the INBOX which has a maximum capacity of 70 messages. When the INBOX is full, any further messages will be rejected. SMS FULL will be displayed during the standby mode.
Saved and error messages will be stored in the OUTBOX which can store up to 30 messages. When the OUTBOX is full, no new messages can be created anymore. OUTBOX FULL will be displayed when an attempt is made to create a new message.
Only one handset can access the SMS menu at one time. SMS IN USE will be displayed on every other handset when one handset is in SMS menu.
SMS Service
SMS Service needs to be turned on to access the SMS menu and to send/receive messages. When the SMS Service is off, incoming rings won’t be suppressed and CID’s won’t be checked with SC numbers. Only the SMS SERVICE menu will be accessible in the SMS menu when SMS Service is off. If the SMS Service is set to off while there is one or more messages in the queue to be sent, they won’t be sent out until the SMS Service is set to on.
•Press 
. Use 
to select SMS.
•Press 
. Use 
to select SETTINGS.
•Press 
. Use 
to select SMS SERVICE.
20 of 42