Oricom S6000 manual LCD Display on the Handset, Basic steps to install, Icon Name Description

LCD Display on the Handset

	External /	Message	Ringer Off
	Internal /
		Waiting	Mute
	Conference
Phone On		New CID

Basic steps to install

1.	Connect the plug of the mains adaptor to the socket on the
	back of the base unit and the mains adaptor to the wall mains
	supply.
2.	Plugs the mains adaptor of the additional handset charger to the
	wall mains supply.
3.	Insert 2 rechargeable batteries (included) in each handset

Battery

Left Scroll

Signal Indicator

Digits & Text

Display

7-segment Clock

	observing the polarity, into the battery compartment of each
	handset.
4.	Slide the battery door into place on each Handset.
5.	Place the handsets on the chargers and let the batteries charge for
	a full 14 hours before using for the first time.
6.	Connect one end of the telephone lead to the socket on bottom of
	base unit and the other to the phone socket on the wall.
7.	Check handsets for dial tone by pressing	.
8.	Handset may get warm during initial charge.	This is normal.

Icon	Name	Description
	Battery	• Animated when charging.
		• When the battery indicator displays 4 blocks, the
		battery is fully charged.
		• When the battery indicator displays no block, the
		battery is almost empty, and requires charging.
	Signal Indicator	Steadily – signal linkage between handset and base is
		established.
		Blinking – no signal linkage with any base.
	Off Hook	Display during off hook.
	Calling External	User is calling outside.
	Calling Internal	User is making an intercom call
	Conference	User is talking with one external and another internal
		user.
	External Call	Blinking – there is a call from outside.
		Steady – Line is engaged.
	Intercom	Blinking – there is an intercom call.
		– when being paged.
		Steady – Line is engaged.
	New CID	New CID received.
	Left Scroll	The number displayed contains more than 16 digits and
		the rightmost 16 digits are displayed.
	Mute	Handset microphone is muted during off hook.
	Ringer Off	The handset ringer is turned off.
	Message Waiting	Message waiting indication (VMWI) has been received.

CAUTION

Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage the unit.

Adaptor for Base

Input: 230 VAC 50 Hz

Output: 9 VDC 300 mA

Adaptor for Charger

Input: 230 VAC 50 Hz

Output: 9 VDC 150 mA

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries; use recommended type supplied with this telephone. Ni-MH batteries must be disposed of in accordance with applicable waste disposal regulations.

6 of 42