
•You can exit the conference call by pressing on the handset or place the handset on the cradle. The other handset and the
external call will still be connected. The and
icons will be turned off.
Room Monitoring
When more than one handset is registered to the same base unit, one of the handsets can be used as a room (baby) Monitor device.
To activate:
•Press . Use
to select FEATURES.
•Press . Use
to select MONITOR.
•Press . Use
to select ON.
•Press to confirm.
MONITOR will flash on the display to indicate the handset is in monitor mode during standby. User can make internal call to this handset from another handset, the microphone on this handset is activated (being in monitor mode) and noise from the room can be heard. User can also
press to hear from the speaker. There will be no internal ringing.
To
•Press will take you to the MONITOR menu directly.
•Press . The display reads ON.
•Press to select OFF.
•Press to confirm.
Note: The handset under monitor mode will not ring when an external call comes in.
De-register a Handset
One handset can
•Press . Use
to select SYSTEM.
•Press . Use
to select DELETE HS.
•Press .
•Use to select the desired handset (HANDSET 1 to HANDSET 5) to be deleted.
•Press to confirm the selection. The display will read PIN?.
•Enter the correct PIN of the connected base and press to confirm the deletion of the handset.
Note: Each handset can’t
39 of 42