Clarity D703 manual REGISTER/DEREGISTER Handsets, Press Find on base 4 sec Then press # on handset

Page 21

REGISTER/DEREGISTER HANDSETS

Your telephone can support up to five cordless handsets.The additional handset(s) needs to register with the telephone base before use - D703HS™. You must register each additional handset separately.

The handsets provided within your product box are already registered as HANDSET 1 and so forth.Additional handsets are assigned numbers in the order they are registered (HANDSET 2 to HANDSET 5).

When first purchased, all expansion handsets alternately display

Press FIND on base 4 sec

and

Then press # on handset.

The new handset should be charged without interruption for at least 30 minutes before registering to the telephone base.

Register a handset

1.In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select Registration.

2.Press <MENU/SELECT> and screen will alternately show

Press FIND on base 4 sec

and

Then press # on handset

3.Press and hold <FIND> on the telephone base for about four seconds.

4.Press # (pound key) on the handset.The screen shows Registering...

Please wait.

NOTE: There are no indication or Alert Tone to indicate the base is under registration mode.

When the handset is registered successfully, HANDSET registered and then HANDSET X appears on the screen, with X being the handset number (1-5).

REGISTER/DEREGISTER HANDSETS

If the registration is not successful, the handset screen shows Registration failed. Please start again from step 1 above.

Note: You cannot register a handset if any other system handset is in use.To register an expansion handset, follow from the step 3 as above.

Deregister all handsets

You can deregister handsets.You may need to deregister your handsets if: You have five registered handsets and need to replace a handset.

-OR-

You wish to change the designated handset number of your registered handsets.

You must first deregister ALL the handsets, and then register each handset you wish to use again, one at a time.

1.Press and hold FIND on the telephone base for about 24 seconds; release FIND.

2.Immediately press FIND again.

3.When complete, the handset screen alternately shows

Press FIND on base 4 sec

and

Then press # on handset.

4.To register the handset(s) to the telephone base again, follow the registration instructions in section Register a handset.

NOTE: There are no visual or audible alerts to indicate the base is under registration mode.

Note:

If the deregistration process is not successful, you might need to reset the system and try again.To reset, unplug the power from the telephone base and plug it back in.

You cannot deregister the handset(s) if any system handset is in use.

38

39

Image 21
Contents D703 Table of Contents Directory Important Safety Instructions Packaging CONTENTS/LOCATION INSTALLING/CHARGING Batteries Installing Your PhoneRD/P Redial / Pause Handset OverviewHeadset Jack Handset Screen Icons Base OverviewHandset Menu Structure Handset Text Entry TableWriting Tips Handset Audio Operation Make a Call Using Your PhoneTemporary tone dialing Answer a CallRedial list Chain dialingFind the Handset Make an Internal CallMake a 3-way Conference Call Add a New Directory Entry DirectoryView a Directory Entry Search a Directory Entry by NameEdit a Directory Entry Speed Dial NumbersDelete a Directory Entry Add a Speed Dial NumberMissed new calls indicator Caller ID DisplayDelete a Speed Dial Number View the Call Log Entries Reasons for missing CID informationStore a Call Log number into the Directory Delete an Entry in the Call LogLCD Language Settings Handset SettingsVoicemail waiting visual message waiting indicator Set Date and TimeBase Settings Press Find on base 4 sec Then press # on handset REGISTER/DEREGISTER HandsetsRegister a handset Please waitMy telephone doesn’t work at all TroubleshootingCannot get a dial tone Cannot dial outExperience poor sound quality when using the speakerphone Hear other calls while using my telephoneMy cordless handset does not ring when I receive a call My caller ID isn’t working My telephone does not receive caller ID when on a callTechnical Information Power Requirements