Clarity D703 Using Your Phone, Make a Call, Temporary tone dialing, Answer a Call, End a Call

Page 12

USING YOUR PHONE

Make a Call

1. Pre-dialing

Enter the phone number first, then press <TALK ON/FLASH> or <SPEAKER> to dial out the number. Press <TALK OFF/CLEAR> or <MUTE/X> to clear the entry.

2. Direct Dialing

Press <TALK ON/FLASH> or <SPEAKER> to access dial tone, then enter the phone number.

3. Dial a speed dial number

In idle mode, press and hold a dial pad key (0 through 9) to display the desired speed dial entry.

The handset automatically dials out the displayed number. - OR -

Press <TALK OFF/CLEAR> to stop dialing the displayed number. Note: You need to set the speed dial number first. If the speed dial location you selected is empty, the screen shows the speed dial list instead.

4.Call from Directory

1.In idle mode, press <UP> to access the directory.Alternatively, press <MENU/SELECT> twice to access the directory from the main menu.

2.Press <UP> or <DOWN> to select the desired directory entry.

3.Press<TALK ON/FLASH> or <SPEAKER> to dial out to the selected entry.

5.Call from the Call Log

1.In idle mode, press <DOWN> to access the call log.

2.Press<UP/DOWN> to select the desired call log entry.

3.Press <TALK ON / FLASH> or <SPEAKER> to dial out to the

20selected entry.

USING YOUR PHONE

6.Call from the Redial List

1.In idle mode, press <REDIAL/PAUSE> to access the redial list.

2.Press <UP> or <DOWN> to select the desired redial number.

3.Press <TALK ON/FLASH> or <SPEAKER> to dial out to the selected

number.

Note:

Your handset automatically times the duration of every call. The call timer will display a few seconds after the call has been made. It is shown in hours, minutes and seconds format.

Temporary tone dialing

If you have pulse (rotary) dialing service only, you can temporarily switch from pulse to touch-tone dialing during a call.

During a call, press <*>. Buttons pressed after this send touch-tone signals.The telephone automatically returns to pulse dialing mode after you end the call.

Answer a Call

When the phone rings, press <TALK ON / FLASH> to use the earpiece - OR -

Press <SPEAKER > to use the speakerphone.

End a Call

During a call connection on handset, press <TALK OFF/ CLEAR> to end the call.

- OR -

Put the handset on the base station to end the call.

21

Image 12
Contents D703 Table of Contents Directory Important Safety Instructions Packaging CONTENTS/LOCATION Installing Your Phone INSTALLING/CHARGING BatteriesHandset Overview RD/P Redial / PauseHeadset Jack Base Overview Handset Screen IconsHandset Menu Structure Handset Text Entry TableWriting Tips Handset Audio Operation Using Your Phone Make a CallTemporary tone dialing Answer a CallChain dialing Redial listFind the Handset Make an Internal CallMake a 3-way Conference Call Directory Add a New Directory EntryView a Directory Entry Search a Directory Entry by NameSpeed Dial Numbers Edit a Directory EntryDelete a Directory Entry Add a Speed Dial NumberMissed new calls indicator Caller ID DisplayDelete a Speed Dial Number Reasons for missing CID information View the Call Log EntriesStore a Call Log number into the Directory Delete an Entry in the Call LogHandset Settings LCD Language SettingsVoicemail waiting visual message waiting indicator Set Date and TimeBase Settings REGISTER/DEREGISTER Handsets Press Find on base 4 sec Then press # on handsetRegister a handset Please waitTroubleshooting My telephone doesn’t work at allCannot get a dial tone Cannot dial outExperience poor sound quality when using the speakerphone Hear other calls while using my telephoneMy cordless handset does not ring when I receive a call My telephone does not receive caller ID when on a call My caller ID isn’t workingPower Requirements Technical Information