TROUBLESHOOTING
"Out of range or no pwr at base" appears on my cordless handset
•Ensure that the telephone base is powered up.
•Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize.
•Move the cordless handset closer to the telephone base.You might have moved out of range.
•Reset the telephone base. Unplug the electrical power.Wait for 15 seconds then plug it back in.Allow up to one minute for the cordless handset and telephone base to reset.
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless telephone.Try installing your telephone as far away as possible from these types of electronic devices.
I experience poor sound quality when using the speakerphone
•For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up.
•When using a speakerphone, controlling background noise in your environment is essential.While you are listening to your party, press MUTE/X to temporarily turn your microphone off.When it is your turn to speak, remember to press MUTE/X again to turn the microphone on.
•Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone.Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should terminate speakerphone operation and return to normal handset mode.
I hear other calls while using my telephone
• Disconnect the telephone base from the telephone wall jack, and plug in a different telephone. If you still hear other calls, the problem is probably in your wiring or telephone service. Call your telephone service provider
TROUBLESHOOTING
My cordless handset does not ring when I receive a call
•Make sure that the ringer is not turned off.
•Make sure the telephone line cord is plugged securely into the telephone base and the telephone wall jack. Make sure the power cord is securely plugged in.
•The cordless handset may be too far from the telephone base.
•Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use.
•You may have too many extension telephones on your telephone line to allow all of them to ring simultaneously.Try unplugging one telephone at a time until the telephone starts ringing.
•The layout of your home or office might be limiting the operating range. Try moving the telephone base to another location, preferably on an upper floor.
•If the other telephones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply).
•Test a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is the telephone wall jack. Contact your telephone service provider (charges may apply).
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless telephone.Try installing your telephone as far away as possible from these types of electronic devices.
•Completely remove then replace the battery. Place the cordless handset in the telephone base.Wait for the cordless handset to reestablish its connection with the telephone base.Allow up to one minute for this to take place.
•Your telephone line cord might be malfunctioning.Try installing a new telephone line cord.
42
(charges may apply).
43