INSTALLATION
Warning: To prevent electrical shock, always unplug the telephone line cord from the wall before removing the cord from the telephone. Never leave the cord connected to the wall if it is not also connected to the telephone.
•Hold the Clarity telephone so that the holes on the mounting bracket line up with the raised mounting pins on the modular wall jack. Once the holes are lined up, push the phone in towards the wall jack and then slide the phone downward until it is securely seated on the wall jack.
•Plug one end of the handset cord (coiled) into the bottom of the handset.
•Plug the other end of the handset cord into the jack located on the lower left edge of the Clarity telephone.
•Place the handset in the cradle of the Clarity telephone. The special tabs will hold it in place.
signal |
Hook switch
Tabs
Desk Mount key
Wall
Mount
Key
Modular wall jack