Multi-Unit User Operations
Handset Registration to a Base Unit
The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered as follows.
Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing . If
over 1 minute, press then start over again.
To exit the operation, press at any time.
1 | Press JOYSTICK | 2 Select “ |
| Setting | 3 | Select |
| ||||||
| (or move). | Handset | ”. |
|
| “Registration”. |
4 Select “Register H/set”.
6 Select the desired base unit.
5 Press and hold on the Base Unit (for about 3 seconds) until the tone sounds.
•If all registered handset(s) start ringing (paging), press to stop paging then start over again.
7 PIN.Enter | 8 Press JOYSTICK. | ||
(Factory Preset 0000) |
|
|
|
Cordless Telephone
When a handset is registered successfully, a confirmation tone sounds and the “ ” icon is displayed.
•If you enter an incorrect Base Unit PIN, the error tone will sound. Please repeat from step 1.
•The handset main menu may change corresponding to the base unit that it is registered to.
51