Answering System
Answering System Direct Command
You can operate the answering system by pressing dialling buttons as direct command.
1 | Press JOYSTICK | 2 Select “ |
| TAM | 3 | Select “Play New Msg.” | |||
| |||||||||
| (or move). | Operation | ”. |
| or “Play All Msg.” | ||||
|
|
|
|
|
|
|
|
|
|
Follow steps 1 to 3 shown above, then:
Press | 1 |
| To repeat a message. |
Press | 2 |
| To skip a message. |
Press | 9 |
| To stop a message playback. |
Press |
| 4 | To delete one incoming/memo message. *1 |
Press |
| 5 | To delete all incoming/memo messages. |
Follow steps 1 to 2 shown above, then: | |||
Press | 3 |
| To enter the answering system setting menu. |
Press | 4 |
| To playback new incoming/memo message(s). |
Press | 5 |
| To playback all incoming/memo messages. |
Press | 6 |
| To playback a greeting message. |
Press | 7 | 4 | To record a memo message. |
Press | 7 | 6 | To record your own greeting message. |
Press | 8 |
| To set the answering system ON. |
Press | 9 |
| To stop playing back or recording a message. |
Press | 0 |
| To set the answering system OFF. |
Press |
| 6 | To delete your own recorded greeting message. |
*1 This function is available only during an incoming/memo message playback.
Answering System
67