Panasonic kx-tg1805al operating instructions Call options, Display setup

TG1805AL(e-e).book Page 21 Thursday, March 17, 2005 9:37 AM

					Handset Settings
4	Select “Night Mode”, then press {>}.	4		Select “Standby Display”, then
5	Select “On/Off”, then press {>}.			press {>}.
		5		Select the desired setting, then press
6	Select “On” or “Off”, then press {>}.
				{>}.
7	Press {ih}.
		6		Press {ih}.
Note:
			Note:
LWhen the night mode is turned on, “[N]”
			LIf “Handset Number” is selected and the
	is displayed.
				current handset number is 2, “[2]” is
Setting the ring delay for night mode				displayed.
This setting allows the handset to ring during
			Changing the display contrast
night mode if the caller waits long enough.
After the selected amount of time passes,		1		Press {j/OK}.
the handset will ring, useful when someone		2		Select “Handset Setup”, then press
urgently needs to speak with you. If you
select “No Ringing”, the handset will not		3		{>}.
ring during night mode.				Select “Display Setup”, then press
1	Press {j/OK}.	4		{>}.
2	Select “Handset Setup”, then press			Select “Contrast”, then press {>}.
3	{>}.	5		Press {e} or {v} repeatedly to select
	Select “Ringer Setup”, then press			the desired contrast, then press {>}.
4	{>}.	6		Press {ih}.
	Select “Night Mode”, then press {>}.
5	Select “Ring Delay”, then press {>}.
6
	Select the desired setting, then press		Call options
7	{>}.
	Press {ih}.
			Turning call bar on/off
			This feature prohibits making outside calls.
			When call bar is turned on, only intercom
Display setup
			calls and calls to emergency numbers (page
			26) can be made.
Selecting the standby mode		1		Press {j/OK}.
display		2		Select “Handset Setup”, then press
“Handset Number”: The current handset		3		{>}.
number is displayed.				Select “Call Options”, then press
“Off”: Only the current date and time are				{>}.
displayed.		4		Select “Call Bar”, then press {>}.
1	Press {j/OK}.
		5		Enter “0000” (default handset PIN).
2	Select “Handset Setup”, then press
				LIf you changed the PIN, enter it (page
	{>}.			22).
3	Select “Display Setup”, then press
		6		Select “On” or “Off”, then press {>}.
	{>}.
				21