Panasonic kx-tg1805al operating instructions Resetting the base unit to its default settings

Page 28

TG1805AL(e-e).book Page 28 Thursday, March 17, 2005 9:37 AM

Base Unit Settings

consult your nearest Panasonic service centre.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it.

4Select “Other Options”, then press

{>}.

5Select “Base Unit PIN”, then press

{>}.

6Enter the new 4-digit base unit PIN, then press {j/OK}.

7Press {ih}.

Resetting the base unit to its default settings

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

27).

4Select “Other Options”, then press

{>}.

5Select “Reset Base”, then press {>}.

6Select “Yes”, then press {>}.

7Press {ih}.

Note:

LThe following items will be deleted or reset to their default settings:

–Settings listed on page 24

–Caller list

LThe following items will be retained:

–Date and time

–Repeater mode

28

Image 28

Contents Model No. KX-TG1805AL Introduction Making/Answering Calls Accessory information Included accessoriesAdditional/replacement accessories Model No DescriptionBattery caution Important informationGeneral EnvironmentTG1805ALe-e.book Page 6 Thursday, March 17, 2005 937 AM Installation Instructions to customerService difficulties Controls and displays ControlsHandset Charge contact Phonebook Talk Navigator key Base unit Charge contactConnections DisplaysDisplay icons Display Meaning IconBattery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Redial feature Making callsOther features Answering callsTo adjust the ringer volume when an outside call comes Auto talk featureHandset locator Using the phonebook Adding entries to the phonebookFinding and calling a phonebook entry Editing entries in the phonebookChain dial Guide to handset settings Handset settings Sub-menu Default setting MenuRinger setup Night modeRinger volume Changing ringtonesDisplay setup Call optionsResetting the handset to its default settings Other optionsTurning auto talk on/off Turning keytones on/offTG1805ALe-e.book Page 23 Thursday, March 17, 2005 937 AM Guide to base unit settings Base unit Sub-menu Default setting Settings menuNight mode Setting pause length Changing the recall timeStoring/changing emergency numbers Selecting area codes to be deleted automaticallySetting call restriction Changing the base unit PIN Personal Identification NumberResetting the base unit to its default settings Using Caller ID service Caller listCall waiting and Caller ID compatible Viewing the caller list and calling backVoice mail service Editing a caller’s phone number before calling backErasing caller information Storing caller information into the phonebookOperating additional units Registering a handset to a base unitAdditional handsets Manual registrationCancelling a handset Cancelling a base unitTurning the repeater mode on/off Increasing the range of the base unitIntercom between handsets HandsetWall mounting 60 mm ScrewsAvailable character entries Character entry modesExtended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Redial the number manually Specifications Index PINTG1805ALe-e.book Page 42 Thursday, March 17, 2005 937 AM TG1805ALe-e.book Page 43 Thursday, March 17, 2005 937 AM Sales Department Panasonic Australia Pty. Limited Copyright