Panasonic KXTG4733B, KX-TG223SK Call block Caller ID subscribers only, Storing unwanted callers

Programming

2Enter the desired name (max. 10 characters; see the character table, page 21).

R If not required, go to step 3.

3MSAVEN

4MbN: Select the desired setting. a MSELECTN 2 times

5MOFFN

Call block (Caller ID subscribers only)

This feature allows the unit to reject calls when:

–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 30).

–the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 30).

When a call is received, the unit rings for a short time while the caller is being identified. If the phone number matches an entry in the call block list, the unit sends out a busy tone to the caller, and then disconnects the call.

Important:

RWhen the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list

(page 33) with after the call is disconnected.

Storing unwanted callers

You can store up to 30 phone numbers in the call block list.

Important:

RWe recommend storing 10 digits (including an area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.

nFrom the caller list:

1 MFN CID

2MbN: Select the entry to be blocked. R To edit the number, press MEDITN

repeatedly until the phone number is shown in the 10-digit format.

3MSAVEN

4MbN: “Call block” a MSELECTN

5 MbN: “Yes” a MSELECTN

6Edit the phone number if necessary (24 digits max.).

7MSAVEN a MOFFN

nBy entering phone numbers:

1MMENUN#217 a MADDN

2Enter the phone number (24 digits max.).

R To erase a digit, press MCLEARN.

3MSAVEN a MOFFN

Blocking incoming calls without phone number

You can reject a call when no phone number is provided, such as a call just showing “Out

of area”.

1MMENUN#240

2MbN: Select the desired setting. a MSAVEN a MOFFN

Viewing/editing/erasing call block numbers

1MMENUN#217

2MbN: Select the desired entry. R To exit, press MOFFN.

3To edit a number:

MEDITN a Edit the phone number. a MSAVEN a MOFFN

To erase a number:

MERASEN a MbN: “Yes” a MSELECTN a MOFFN

Note:

RWhen editing, press the desired dial key to add, MCLEARN to erase.

RWhen viewing, “Block w/o num” is displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: MERASEN a MCN a MSAVEN a MOFFN

30For assistance, please visit http://www.panasonic.com/help