Panasonic KX-TG1810NZ operating instructions Night mode, Select Base Unit Setup, then press

Page 25

Base Unit Settings

Ringer setup

Ringer volume

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

28).

4Select “Ringer Setup”, then press {>}.

5Select “Ringer Volume”, then press {>}.

6Press {e} or {v} repeatedly to select the desired volume.

7Press {>}.

8Press {ih}.

Night mode

Night mode allows you to select a block of time during which the base unit will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 20) and the base unit.

Set the date and time beforehand (page 10).

Setting the start and end time for night mode

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

28).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “Start/End”, then press {>}.

7Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

8Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

9Press {j/OK}.

10Press {ih}.

Turning night mode on/off

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

28).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “On/Off”, then press {>}.

7Select “On” or “Off”, then press {>}.

8Press {ih}.

Setting the ring delay for night mode

This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected amount of time passes, the base unit will ring, useful when someone urgently needs to speak with you. If you select “No Ringing”, the base unit will not ring during night mode.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

25

Image 25

Contents Model No. KX-TG1810NZ Introduction Night mode Feature highlightsPhonebook Phonebook categoryMaking/Answering Calls Included accessories Accessory informationAdditional/replacement accessories Important information Battery cautionGeneral EnvironmentControls Controls and displaysMicrophone Base unit Charge contactDisplays ConnectionsDisplay icons Display Meaning IconBattery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Making calls Redial featureOther features Answering calls Adding entries to the phonebook Using the phonebookCategories Finding and calling a phonebook entryOne touch dial Erasing entries from the phonebookErasing an entry Erasing all entriesChain dial Copying phonebook entries to other handsetsCopying one entry Copying all entriesHandset settings Sub-menu Default setting Menu Guide to handset settingsRinger setup Time settingsAlarm Ringer volumeSetting the start and end time for night mode Night modeTurning night mode on/off Setting the ring delay for night modeSelecting the standby mode display Display setupSelecting categories to bypass night mode Changing the display languageOther options Call optionsResetting the handset to its default settings Base unit Sub-menu Default Settings menu Guide to base unit settingsSelect Base Unit Setup, then press Night modeChanging the recall time Setting pause lengthStoring/changing emergency numbers Selecting area codes to be deleted automatically Setting call restrictionChanging the base unit PIN Personal Identification Number Resetting the base unit to its default settingsCategory features for Caller ID subscribers Using Caller ID serviceViewing the caller list and calling back Caller listEditing a caller’s phone number before calling back Erasing caller informationCall minder Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base unitsSelecting a base unit Cancelling a handsetTurning the repeater mode on/off Cancelling a base unitIntercom between handsets Increasing the range of the base unitTransferring calls between handsets, conference calls 60 mm Screws Hooks Wall mountingCharacter entry modes Available character entriesExtended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Useful Information Specifications PIN IndexCopyright Customer Support Centre Tel. No 272 Sales Department