Base Unit Settings
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Ringer Setup”, then press {>}.
5Select “Night Mode”, then press {>}.
6Select “Ring Delay”, then press {>}.
7Select the desired setting, then press {>}.
8Press {ih}.
Call options
Changing the recall time
Change the recall time, if necessary, depending on the requirements of your service provider or PBX.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Call Options”, then press {>}.
5Select “Recall”, then press {>}.
6Select the desired setting, then press {>}.
7Press {ih}.
Setting pause length
Change the pause length, if necessary, depending on the requirements of your service provider or PBX.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page 28).
4Select “Call Options”, then press {>}.
5Select “Pause Length”, then press {>}.
6Select the desired setting, then press {>}.
7Press {ih}.
Storing/changing emergency numbers
These settings determine which phone numbers can be dialled while the call bar feature is on (page 22).
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Call Options”, then press {>}.
5Select “Emergency No.”, then press {>}.
6Select a memory location, then press {>}.
LIf the memory location already contains an emergency number, the number is displayed.
7Enter/edit the number, then press {j/OK}.
LTo erase an emergency number, press and hold {C/T}.
8Press {ih}.
Note:
LThe default setting for emergency numbers are stored in the first 3 memory locations. It is recommended that you do not overwrite these numbers.
26