Panasonic KX-TG1810NZ Important information, General, Environment, Location, Battery caution

Page 6

Preparation

Important information

General

LUse only the AC adaptor included with this product, noted on page 5.

LDo not connect the AC adaptor to any AC outlet other than a standard 220–240 V AC outlet.

LThis product is unable to make calls when:

The portable handset battery(ies) need recharging or have failed.

There is a power failure.

The key lock feature is turned on.

The call bar feature is turned on (only phone numbers stored in the unit as emergency numbers can be called).

LDo not open the base unit or handset other than to replace the battery(ies).

LThis product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.

LCare should be taken that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this product to excessive smoke, dust, mechanical vibration or shock.

Environment

LDo not use this product near water.

LThis product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C.

LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible.

Warning:

LTo prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture.

Location

LFor maximum distance and noise-free operation, place your base unit:

Away from electrical appliances such as TVs, radios, personal computers or other phones.

In a convenient, high and central location.

Battery caution

LWe recommend using the battery(ies) noted on page 5. Use only rechargeable battery(ies).

LDo not mix old and new batteries.

LDo not dispose of the battery(ies) in a fire, as they may explode. Check local waste management codes for special disposal instructions.

LDo not open or mutilate the battery(ies). Released electrolyte from the battery(ies) is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

LExercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns.

LCharge the battery(ies) in accordance with the information provided in these operating instructions.

LOnly use the included base unit (or charger) to charge the battery(ies). Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the battery(ies) to swell or explode.

6

Image 6
Contents Model No. KX-TG1810NZ Introduction Phonebook Feature highlightsNight mode Phonebook categoryMaking/Answering Calls Accessory information Included accessoriesAdditional/replacement accessories General Battery cautionImportant information EnvironmentMicrophone Controls and displaysControls Base unit Charge contactDisplay icons ConnectionsDisplays Display Meaning IconBattery installation Battery chargeBattery strength Battery icon Battery replacement Turning the power on/offSetting the date and time Example 330 PM Redial feature Making callsOther features Answering calls Categories Using the phonebookAdding entries to the phonebook Finding and calling a phonebook entryErasing an entry Erasing entries from the phonebookOne touch dial Erasing all entriesCopying one entry Copying phonebook entries to other handsetsChain dial Copying all entriesGuide to handset settings Handset settings Sub-menu Default setting MenuAlarm Time settingsRinger setup Ringer volumeTurning night mode on/off Night modeSetting the start and end time for night mode Setting the ring delay for night modeSelecting categories to bypass night mode Display setupSelecting the standby mode display Changing the display languageCall options Other optionsResetting the handset to its default settings Guide to base unit settings Base unit Sub-menu Default Settings menuNight mode Select Base Unit Setup, then pressSetting pause length Changing the recall timeStoring/changing emergency numbers Setting call restriction Selecting area codes to be deleted automaticallyResetting the base unit to its default settings Changing the base unit PIN Personal Identification NumberUsing Caller ID service Category features for Caller ID subscribersEditing a caller’s phone number before calling back Caller listViewing the caller list and calling back Erasing caller informationCall minder Additional handsets Operating additional unitsRegistering a handset to a base unit Additional base unitsCancelling a handset Selecting a base unitIntercom between handsets Cancelling a base unitTurning the repeater mode on/off Increasing the range of the base unitTransferring calls between handsets, conference calls Wall mounting 60 mm Screws HooksAvailable character entries Character entry modesExtended 1 character table N Extended 2 character table OCyrillic character table P Troubleshooting Initial settingsProblem Cause & solution Telephone Useful Information Specifications Index PINCustomer Support Centre Tel. No 272 Sales Department Copyright