Panasonic KX-TG1810NZ operating instructions Telephone

Page 40

Useful Information

Telephone

Problem	Cause & solution
I cannot make or receive calls.	LThe AC adaptor or telephone line cord is not
	connected. Check the connections.
	LIf you are using a BT double adaptor to connect the
	unit, remove the adaptor and connect the unit to the
	phone wall socket directly. If the unit operates
	properly, check or replace the adaptor.
	LDisconnect the base unit from the telephone line
	and connect the line to a known working telephone.
	If the working telephone operates properly, contact
	our service personnel to have the unit repaired. If
	the working telephone does not operate properly,
	contact your service provider.
	LThe call bar feature is turned on. Turn it off (page
	22).
	LYou dialled a call restricted number (page 27).
	LThe key lock feature is turned on. Turn it off (page
	13).

The unit does not ring.	LThe ringer volume is turned off. Adjust the handset
	ringer volume (page 19) and the base unit ringer
	volume (page 25).
	LThe night mode feature is turned on. Turn it off
	(page 20, 25).

The batteries should be charging	LClean the charge contact and charge again (page
but the battery icon does not	9).
change.	LThe AC adaptor is disconnected. Plug in the AC
	adaptor.

A busy tone is heard when {C} is	LThe handset is too far from the base unit. Move
pressed.	closer and try again.
	LAnother handset is on an outside call. Wait for the
	other user to complete the call.

Static is heard, sound cuts in and	LLocate the handset and the base unit away from
out. Interference from other	other electrical appliances.
electrical units.	LMove closer to the base unit.
	LYour unit is connected to a telephone line with
	ADSL (JetStream) service. We recommend that
	you contact your ADSL service provider to have an
	ADSL Splitter installed. We do not recommend the
	use of generic ADSL filters.

The handset stops working while	LDisconnect the AC adaptor and turn off the
being used.	handset. Connect the AC adaptor, turn on the
	handset and try again.

40

Image 40

Contents Model No. KX-TG1810NZ Introduction Feature highlights Night modePhonebook Phonebook categoryMaking/Answering Calls Included accessories Accessory informationAdditional/replacement accessories Battery caution Important informationGeneral EnvironmentControls and displays ControlsMicrophone Base unit Charge contactConnections DisplaysDisplay icons Display Meaning IconBattery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Redial feature Making callsOther features Answering calls Using the phonebook Adding entries to the phonebookCategories Finding and calling a phonebook entryErasing entries from the phonebook One touch dialErasing an entry Erasing all entriesCopying phonebook entries to other handsets Chain dialCopying one entry Copying all entriesGuide to handset settings Handset settings Sub-menu Default setting MenuTime settings Ringer setupAlarm Ringer volumeNight mode Setting the start and end time for night modeTurning night mode on/off Setting the ring delay for night modeDisplay setup Selecting the standby mode displaySelecting categories to bypass night mode Changing the display languageCall options Other optionsResetting the handset to its default settings Guide to base unit settings Base unit Sub-menu Default Settings menuNight mode Select Base Unit Setup, then pressChanging the recall time Setting pause lengthStoring/changing emergency numbers Setting call restriction Selecting area codes to be deleted automaticallyResetting the base unit to its default settings Changing the base unit PIN Personal Identification NumberUsing Caller ID service Category features for Caller ID subscribersCaller list Viewing the caller list and calling backEditing a caller’s phone number before calling back Erasing caller informationCall minder Operating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Selecting a base unitCancelling a base unit Turning the repeater mode on/offIntercom between handsets Increasing the range of the base unitTransferring calls between handsets, conference calls Wall mounting 60 mm Screws HooksAvailable character entries Character entry modesExtended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Useful Information Specifications Index PINCustomer Support Centre Tel. No 272 Sales Department Copyright