Preparation
Display language
1{ih} i "(middle soft key)
2Select Nby pressing {^}, {V}, {<}, or {>}. i#(middle soft key)
3Press {^} or {V} to select “Display Setup”. i #
4Press {^} or {V} to select “Select Language”. i #
5Press {^} or {V} to select the desired language.i #i{ih}
Note:
LIf you select a language you cannot read, press {ih}, ", press {V}, press #, press {V} 2 times, press #, press {V} 3 times, press #, select the desired language, then press #. Press {ih}.
Date and time
1"(middle soft key)
2Select Nby pressing {^}, {V}, {<}, or {>}. i#(middle soft key)
3Press {^} or {V} to select “Time Settings”. i #
4Press {^} or {V} to select “Set Date & Time”. i #
5Enter the current day, month, and year. Example: 17 May, 2006
{1}{7} {0}{5} {0}{6}
6Enter the current hour and minute. Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until “03:30 PM” is displayed.
7#i {ih}
Note:
LTo correct a digit, press {<} or {>} to move the cursor, then make the correction.
LThe date and time may be incorrect after a power failure. In this case, set the date and time again.
11